How to enter bios on an Asus laptop? The main functions of the BIOS. We enter the BIOS on an asus laptop - a special button, system boot

poorly Fine

BIOS setup is very important for every computer, because stability and performance of the PC completely depends on it. BIOS is a kind of software firmware located in the chip of the computer motherboard and controlling its system operation. The BIOS controls the operation of the processor, cooling fans and all other devices that make up the system unit. If you correctly configure the BIOS, you can achieve higher performance or make the changes necessary for operation, so every advanced PC user should understand all the BIOS settings, which we will talk about.

How to enter and exit BIOS

In order to proceed with the settings, you need to enter the BIOS. It is very easy to do this, at the very beginning of the computer boot, you need to press the delete key several times. On some versions of motherboards, you may need to press other keys, for example, F12. The motherboard boot menu usually shows which button to press. After all the settings are done, you must press the F10 key and confirm the exit with saving all the new settings that were made.

How to make your PC boot faster

If you decide to speed up the computer boot, then after entering the BIOS menu, go to the Main item and set the Timeout value to 0. As a result, the operating system on the computer will immediately boot from the hard disk. The fact is that if you do not change this parameter, then the computer starts looking for all devices and only then chooses to boot from the hard drive, which increases its time.

We increase the possibilities of charging USB devices

Now every PC user has different devices such as mobile phone, smartphone, mp3 player, tablet and many other devices that are connected to a computer via a USB port. These devices start charging immediately after being connected. But with standard settings, the output voltage is small and charging takes a long time. Using BIOS settings, you can increase the voltage and speed up charging. To do this, go to the USB 2.0 HS Reference Voltage settings and select the maximum value.

Sometimes, in order for the USB 2.0 port to work, it must be enabled in the BIOS settings. To do this, first you need to go to the port settings and set the Enabled value opposite it, which means enabled.

Troubleshooting fan problems

Sometimes the operation of the cooler can cause a conflict with the BIOS settings, and the computer will stop working. But, in fact, the fan speed is enough to cool the processor. This is due to the dependence of the processor temperature on the fan speed. To eliminate the reason for the inability to boot into the BIOS, go to the CPU Fan Failur Warning section and disable this parameter by setting Disabled. After that, you need to temporarily install a cooler operating at maximum speed so that you can load the BIOS, perform the settings and then return the old fan to its place.

Unnecessary functions for video cards

The BIOS has a couple of features designed for video cards to speed up their work in DOS mode. To remove these completely useless for Windows functionssuch as Video RAM Cacheable and Video BIOS Cacheable must be disabled.

How to enable processor cache in BIOS

Each processor has such a high-speed memory as a cache, thanks to which the processor and the computer itself can work much better. But in BIOS it can be disabled in the standard settings. In order to check this, you need to go to the section Advanced BIOS Features, find the CPU L3 Cache option and enable it. After that, the work of the central processor on the PC will be faster and more productive.

Choosing a device to download

The computer can be booted from a hard disk, CD drive and other storage media. To speed up the download, you need to set the boot from the HDD in the first position so that the PC does not waste time trying to boot, for example, from the floppy drive and only then go to the hard disk. To do this, go to the Advanced BIOS Features section, then to the Boot Sequence and, at the very first point, set the boot from the HDD, which can be selected in the list of devices.

PC status monitoring

With the help of BIOS, you can monitor the temperature of the processor and, if necessary, set an alarm or shutdown when the temperature is exceeded. To do this, in the BIOS, you need to go to the Health section, where you can control and adjust the processor temperature parameters.

Setting up notifications about HDD problems

If you enable HDD Smart Capability, you can receive messages about problems with the hard drive. This is possible thanks to self-diagnostics of the HDD, which is enabled by this function.

Burst data transfer

In some versions of BIOS asus and others, it is possible to enable packet data transfer mode. This can be done if the BIOS has a Burst mode function that must be enabled. As a result, data transfer between RAM and hard drive will be significantly faster.

How to turn off the built-in sound card

If you connect an external sound card to your computer that provides a higher sound quality, then the built-in one must be disabled. This can be done using the BIOS menu, in which you need to find and turn off the AC97 Audio Select parameter.

RAM acceleration

In order to get better performance in the operation of the computer, sometimes you can increase the voltage on the RAM, which allows you to achieve higher speed in operation. This can be done using Bios, where the DDR Reference Voltage parameter is responsible for the voltage, which must be increased by 0.1 V gradually, so as not to damage the RAM.

Numerous BIOS settings allow experienced PC users to customize the computer for themselves, achieving higher performance and other characteristics necessary for work.

This article can also be found on request: asus bios.

Every year ASUS products are in great demand among consumers. In addition to high-quality assembly, the full operation of the computer system is ensured by its competent setting of all parameters, the initial stage which is the correct entrance to the BIOS on the Asus laptop.

What is BIOS

The abbreviation BIOS stands for the basic input and output system. It acts as an integral part of the computer system software. Therefore, answering the question of how to enter BIOS on an ASUS laptop, you need to clearly understand what you have to deal with.

The BIOS is located on the motherboard chip and has its own energy source - a battery. This system acts as a data storage and a guarantee that the necessary information will not be lost in the event of a device failure. All the settings of the Asus system are saved on it. It is a permanent storage device.


The main function of the BIOS is the timely detection and recognition of all constituent elements of the system:

  • random access memory;
  • video cards;
  • processor;
  • devices inside the laptop;
  • and external connected accessories (flash drive, disk).

BIOS checks all communication between them and only then proceeds to launch operating systempassing control to the bootloader. In other words, it acts as a key link between devices and the operating system.

How to enter BIOS on an ASUS laptop

There are many ways to enter BIOS using various key combinations. But here you need to take into account the fact that depending on the model, modification of the laptop motherboard, the whole sequence of actions can differ significantly. In most cases, the Del, F2, Ctrl, Esc keys take part in loading parameters.

Let's consider several ways thanks to which you can enter BIOS in an ASUS laptop as quickly as possible:



Entering BIOS with Windows OS

In different versions, the way how to get into the BIOS on an ASUS laptop is different, so we will consider each separately.

Windows 7

Separately, it is worth noting the ability to enter the BIOS with the laptop turned on.

If Asus is equipped with Windows 7 or XP version, then entering the command “ msinfo32". There are several ways to set it:

  • Enter " msinfo32"In the search bar Start and then press Enter.
  • Set a combination to run Task manager Ctrl + Shift + Esc or Ctrl + Alt + Delete, go to the section “ File"And choose" New task (Complete ...)". In the window that opens, in the input line, type “ msinfo32»And confirm with OK.
  • Press the key combination + R. In the input line enter “ msinfo32»And select the OK button.

As a result of correct key entry in any of the ways, a window will open with all the data about the OS and the version of the BIOS used on the laptop. Then you just need to choose the right keys for the installed type of BIOS. The following selection of login buttons is a good hint.


Pressing one of these key combinations at the same time when booting into Windows 7 or XP will open the main BIOS menu.

Windows 8

First of all, you should make a competent connection of the external device, since to enter the BIOS menu on an ASUS laptop with Windows 8 installed, it will correctly use the UEFI settings.

To start the BIOS, you will have to perform the following sequence of actions:

  1. On Control panels select the desktop option " Options» ( Settings).
  2. At the bottom of the window that opens, click " Change computer settings» ( Change pc settings).
  3. In the menu that appears, select " General» ( General), then press “ Special boot options» ( Advanced startup), and then Reboot now (Restart now).
  4. At the end of the reboot, you must choose the section " Diagnostics» ( Troubleshout).
  5. In the window that opens, find " Extra options» ( Advanced options).
  6. Then choose “ UEFI firmware options» ( UEFI Firmvare Settings).
  7. Finally, in the last window, click on the Restart button.

And if all the stages step by step instructions are respected, the BIOS will start immediately after the system reboot.


Windows 10

In the updated windows versions 10 it is also possible to enter the BIOS settings by giving such a command to the laptop before starting it to reboot. It is necessary to hold down the button, after which the OS will go to the BIOS menu.

BIOS sections

Having figured out how to enter the BIOS software in an ASUS laptop, a blue partition window opens. Among which:

  • Power is responsible for the consumption of electricity and the presence of constant voltage in the included elements of the system.
  • Main contains information about the type, amount of installed memory, date and time.
  • Boot determines the order in which system parameters are loaded.
  • Advanced includes advanced type settings. Inexperienced users should not experiment with this section.
  • Exit prompts you to leave the system.

Pressing Enter confirms the selection of any of the sections. Arrows of the cursors on the keyboard are responsible for moving between sections. To make changes to the selected view of the menu section, use the PgUp or PgDn keys.

Conclusion

If you have recently acquired a laptop from ASUS, then basic knowledge will help you answer many of your questions and help you enter the system settings. of English language and instructions for the computer device that comes with the kit. And competent work with software BIOS will help you make the necessary changes to the system in a timely manner and eliminate possible problems.

Related Videos

Asus is an immensely popular manufacturer of quality computer hardware and components from Taiwan. It is known that in Russia at least a quarter of laptops belong to this particular company. Asus motherboards are equipped with various BIOS modifications. In each case, you can use several ways to log into this system. But often novice users of ASUS products have problems with opening the BIOS. We'll have to figure out how to open this system, as well as find out the recommendations of the professionals. Perhaps the most popular way is to log into the BIOS of your personal laptop or netbook. They log into the system when the computer is turned on, but press the DEL key. This must be done quickly, literally in five seconds, otherwise the screen will switch to standard operation.

Further, you can already make the necessary manipulations with the BIOS. Before we start listing other ways to use BIOS on Asus laptops, it is worth recalling some practical advicewhich will be very useful for beginners. First, remember that it is the Del key that is most often used as a system customizer. There are special cases when this button does not work, and then you can use system settings change the "default key" to any other. Secondly, if the computer was released before 2008, then you should press the F10 or F12 button, not Del. It will open access to the "electronic version" of the motherboard. Thirdly, if none of these keys provide access to the BIOS, you should restart your computer and contact Asus technical support.

How to enter bios on laptop asus? After all, the Windows system boots up very quickly, and sometimes you can't catch the right moment? In fact, if you didn't manage to press the BIOS call button in time, you just need to restart the computer and re-type the desired key. After that, you can already enter the BIOS. It should be remembered that this is, first of all, the basic system of output and data input; this is how this abbreviation stands. When we press the power button to turn on the computer, the system immediately starts recalculating and loading the operating system of the Asus laptop. Some novice users ask how to enable BIOS on asus laptop. This is somewhat incorrect - the BIOS is constantly running, in parallel with the main operating system.

How to enter BIOS on an asus laptop? If everything is done correctly, the famous "blue window" of the BIOS will open with the settings most important for the operation of the operating system. Empirically, it was found that it is the F2 key that allows you to slightly slow down the loading and, accordingly, allows you to enter the BIOS window on time. The fact is that most laptop manufacturers today have already reconfigured their products to suit the tastes of consumers. Many users agree that it is F2 that allows you to open the BIOS window faster than Del or F10. The user himself can in the "User settings" select the most optimal key combination for his keyboard, which will automatically be sent to the BIOS. If you can't do everything yourself, then you can refer to the instructions or various manuals on this topic.

How to enter BIOS on an asus laptop? Often Asus-netbooks and laptops go to the BIOS settings window by pressing the F2 key immediately after turning on the power. One of the main features of this technique is the disorder and some complexity of using BIOS by ordinary users. It should also be noted that, in principle, it will be more difficult to enter BIOS from Asus laptops, since the main parameters of the Windows operating system are loaded quite quickly, and it will no longer be possible to get into the desired BIOS window until the next reboot. You should also consider the fact that the processor of a compact computer often contains specialized, advanced security settings, touchpad control systems, an additional operating system, which instantly loads Windows.

Empirically, it was found that it is the F2 key that allows you to slightly slow down the loading and, accordingly, allows you to enter the BIOS window on time. The fact is that most laptop manufacturers today have already reconfigured their products to suit the tastes of consumers. Many users agree that it is F2 that allows you to open the BIOS window faster than Del or F10. As mentioned above, sometimes a special key combination is used, which can be specified by the user himself, or which is provided by the laptop manufacturer. How to enter BIOS on an asus laptop if it is a key combination provided, but it is not known which one? There are several exits here. First, you should review the instructions again - sometimes information is given on last pages or printed in small print.

Secondly, you can contact the official technical support. To do this, you should either call the hotline, or write to the site operator with a request to clarify the situation. This option is a win-win: reliable in terms of work with customers, Asus always helps its users to deal with technical problems... Thirdly, you can contact special salons for the repair of computer equipment. It is there that you can consult about the required keyboard combination to enter BIOS. Perhaps, in most cases, it will be easy for Asus laptop users to enter the BIOS, and in case of unforeseen situations there are useful and very practical recommendations!

You will need:

  • Knowing how to enter BIOS
  • Problems entering BIOS and their solution
  • Understanding what exactly is worth changing and what should not be touched
  • Default settings"
  • Caution or mild pursuit mania
  • Reinstallation (installation) of the operating system

BIOS (Basic Input Output System) is a program that provides a global pre-startup check of the laptop's health. Checking the functionality of the components is accompanied by their configuration, then the operating system is loaded. Fundamentally, the way to enter the settings on a regular and laptop computers does not differ. However, unification has led to the fact that, as a rule, on a "full-size" PC, you need to press "Del" in time. And how to enter BIOS on a laptop is a question that is solved for all brands in different ways. Asus is generally configured to respond to the F2 function key or Ctrl + F2. You just need to not miss the moment - press them in the very first moments of turning on the laptop. Acer, RoverBook, iRu, Samsung react in a similar way to F2.

We cannot exclude the possibility of a non-standard technical solution embodied in specific model... Reasons: installing a motherboard from a new partner, a new motherboard from ASUS, released in a small edition, etc. What to do if the technical documentation is lost, but nothing was found on the site: how to enter the BIOS on an asus laptop so unique? Do not worry: some method, implemented on other machines, will probably do. You should check the standard keys and their combinations: Del, F1-F3, F8-F10 F12, Esc, Ctrl + Alt + Esc, Ctrl + Alt + S. In fact, there are not so many manufacturers of such equipment, so one of the listed methods will justify itself. Extremely unlikely, although Ctrl + Alt + Del, Fn + F1, Ctrl + Alt + Ins, Ctrl + Alt + Enter, Ctrl + Fn are implemented.

Thoughtless experiments in the parameters will most likely lead to disastrous results. It is difficult to break something here, although it is possible, but simply to render the system unusable so that neither Windows nor Linux will start is easy. The simplest and most harmless thing for which it is worth visiting BIOS is to check for failures, poor performance or inoperability of components. If you already know how to enter the BIOS on an asus laptop, there is an initial knowledge of English, there are no problems. Check when "braking" is the temperature of the processor, hard drive. The reasons for overheating are trivial: dusty fan filters, old thermal grease on the processor, etc.

On a laptop, an additional numeric keypad is not a curiosity for a long time - many appreciated the convenience of a "makeweight", although a third of users are not interested in it and do not need it. When starting the operating system, additional keys work in the numeric, or alternatively, as cursor control. The Fn key can also function in different modes - normal and "pressed by default". A person, knowing how to enter the BIOS on an asus laptop, can easily adjust these and other parameters "for themselves." Don't just get carried away with settings and updates. Experts advise updating the BIOS in general if defects of the old firmware appear in the work or the manufacturer has sent out strong recommendations for such a procedure.

Discretion has not bothered anyone yet. You don't need to have scary secrets to be afraid of spreading them: personal information is also worth heightened protection. A scanned passport, an accounting report, personal photos and videos, saved passwords - your own and your work, all this can, falling into the wrong hands, complicate your life. Windows password - protection only from a second grader. Password in the BIOS administrator, password protected (with different passwords) system, hDD, prohibiting booting from external devices, from DVD-ROM to intruders who know how to enter the BIOS on an asus laptop, will pretty much ruin their lives! Important! If you lose a piece of paper with cherished words, your own life will also be spoiled.

The Windows operating system, or rather, the installation license, compared to the cost of a new laptop is a little worth it. But the cases are different and the computer can be sold without an operating system. To install it, if device selection is not available in any other way, BIOS will have to be configured in advance. In the Boot section, it is proposed to select Boot Device Priority: a device with an operating system distribution kit. This can be a DVD-ROM, a USB flash drive, or a device available over the network. After selecting the desired item and saving the changes, restart the laptop and install the OS. After the installation is complete, we recall again how to enter the BIOS on an asus laptop, visit the BIOS and install Boot Device Priority - the system hard drive.

Do not be afraid of global computer settings. Knowing how to enter the BIOS on the Asus laptop, what can be changed and how to do it correctly, the novice user will leave the beginner stage, becoming advanced. And his customized laptop is the best proof of skill! In addition, you can always return to the factory settings by restoring the "defolt" state.

BIOS is a program that is responsible for the interaction of computer hardware devices. The main basic models with which the laptop performs the initialization and initial check of the equipment are contained in the BIOS.

Special keys are reserved for entering BIOS. They can be different for each motherboard or laptop manufacturer. As an example, let's try to enter BIOS on an Asus laptop.

Fast navigation through the article

Login key

Different laptop manufacturers define different keys for entering BIOS, so the usual standard combinations, such as "Del" (Delete key), may not work.

The "F2" key is reserved for Asus notebooks. On some models the combination "Ctrl + F2" is possible.

input

You can enter BIOS only before the system boots. When the computer starts, the initialization stage goes through, after which a message appears on how you can enter the BIOS. The key with which you can do this will also be indicated.

Customization

In laptops, the capabilities of BIOS are much more modest than on stationary computers. Since the BIOS of laptops is not used for "overclocking", that is, to increase the clock frequency of a computer, you can enter the BIOS in a laptop, basically, only to change the way the system boots.

If you want to change the system or reinstall the old one, then you need to start booting from an external device: a USB flash drive, a boot disk, or an external hard drive. In the BIOS, you can set the boot priority, which will allow you to start the installation of the operating system from a disk (or other source).

Differences from a standard PC

In the BIOS in a laptop, there are also some functions that are different from those in a stationary computer:

  • To fix touchpad settings or screen resolution, you can enter BIOS;
  • If you need the serial numbers of Asus equipment, then it can also be found in the BIOS.

It is better not to change or touch BIOS settings.

Share this article with friends in social. networks:

Recommended to read