How to make a full sheet in a Word. How to make a horizontal sheet in a Word

Everyone knows the most popular text editor in the world is Microsoft Word. It gained its fame for many reasons, but the main one is the presence of a bunch of tools and parameters that make the work in the program convenient, simple and fast. Working with documents means using many of them. One of the tools will be discussed in this article, or rather, how to turn over a sheet in the "Word".

Foreword

Initially, it is necessary to stipulate all the nuances and pitfalls, and only then proceed to detailed instructions on how to turn the sheet in the "Word".

The first thing worth talking about is that when you change the orientation of one sheet in the program, a whole stack of all other sheets changes and the covers change. But there is one trick that will allow you to combine vertically and horizontally sheets in one document, but more on that later.

At this stage of the article, it should also be said that the examples will be provided in the 2016 version, but the instructions are common for all releases of the program. The location of certain interface elements and the display of icons and buttons may only differ, but the sequence of actions will remain the same.

We have finished with the preface, now we can proceed directly to the story of how to turn the sheet in the "Office".

Change the orientation of the sheet throughout the document

So, in front of you is open document... It can be either with a pre-typed text in it, or clean - this does not matter. If you want to change the orientation of all sheets in it, then you need to do the following:

  1. Go to the "Layout" tab in the program (note that in some versions of the program this tab is referred to as "Page Layout").
  2. Click on the "Orientation" button on the toolbar. It is located, by the way, in the "Page Setup" tool group.
  3. After clicking, it will appear in which two options will be offered: "Portrait" and "Landscape". You just have to select the desired orientation and click on it.


Now you know how to turn over sheets in the "Word", but it often happens that you need to turn over only one sheet, and not all. This method, unfortunately, is not suitable for completing the task, but there is another one, which we will talk about now.

Landscape orientation with portrait in one document

You already know how to flip sheets in Word, but how to flip one single sheet - no. And this is not so difficult. Following the instructions that will now be presented, you can easily complete the task.

  1. Select the part of the text you want to place on the reoriented sheet. Please note that the unselected part of the text will remain on another sheet with the same orientation, and may form big gap between the lines.
  2. Go to the "Layout" tab (in new versions of "Word") or "Page Layout" (in older versions of the program).
  3. Click the Fields button located in the Page Setup toolbar.
  4. In the drop-down list that appears, select the "Custom Fields" item.
  5. In the window that opens, in the "Orientation" area, select the desired sheet orientation.
  6. From the Apply drop-down list, select To Selected Text.
  7. Click OK.

Now you know all the ways how to flip a sheet in Word.

How to make a landscape page (sheet) in a Word (Microsoft Office Word)

Microsoft Office Word is a word processor for creating, viewing and editing text documents with the possibility of using the simplest forms of table-matrix elements. It is one of the most popular products of the Microsoft Office suite. It is difficult to find someone who would not have heard and faced work in a Word. And although the program interface is quite understandable and convenient even for a beginner, difficulties often arise with the use of certain functions. That is why in this article, Grandguide will teach you the simplest and most necessary microsoft functions Word.

How to make a page in Microsoft Office Word (Word) landscape, how to change (change) page orientation in a Word

Often there is a need to make pages in a document with different orientations, that is, some with portrait, others with landscape. So, in the example, we have 3 sheets. Let's say you want to make the middle sheet landscape, and leave the first and last in portrait orientation. The easiest way to do this in Microsoft Office Word 2016 is:

However, using this method is not always convenient, since you may need to change the orientation of many pages in a large document, and no one will sit, select and select sheets. Also, this method may not work in earlier versions. Microsoft Word... Therefore, you can do the following:



And if you have any difficulties in Excel, read on.

In order to install landscape orientation document in versions of Microsoft Word 2007 and higher, you must go to the tab " Layout", in section "Page settings"select " Orientation"click " Album ". Here you can return the value later.

It's not for nothing that books are printed exactly in the format we are used to: long but narrow. This is due to the fact that it is easier for a person to follow a line if it is no longer than a certain number of words. Websites on the Internet and pages of text documents are based on the same concept. We scroll up and down, and rarely horizontally. But this does not mean that such an opportunity should be abandoned altogether. For the design of diagrams, complex page structure, for subsequent reformatting to PDF, landscape orientation is often necessary.

In Word it is easy: the " Layout"-\u003e section" Page settings»
-> « Orientation» -> « Landscape».

But it so happens that the document is complex, and album page only need one place to fit the image to its maximum width.

In order to achieve this result, you must first select one page and on the same tab “ Layout" in section " Page settings" click on " Fields", And then select" Custom fields"At the very bottom of the list.

In the window that appears in the section " Orientation"You must select" Landscape". At the bottom of the window, in a drop-down window named “ Apply» - « To selected text", And" OK».


It is worth noting that if not a whole page is selected, but a fragment of text on it, then this piece will remain exclusive in landscape orientation. The rest of the text, depending on where they were - before or after - will be scattered to the previous and next pages, which will already be in normal portrait orientation.


Also, breaks will be added before and after the text on the landscape page, so you can continue to add content there without worrying about what is left outside of it.

The same operation can be done in Word 2003. To do this, go to: “ File» -> « Page settings» -> « Landscape» -> « OK". And here you can also do it with a separate snippet. It must first be selected.

The text editor Word, perhaps familiar to every PC user, is used to create, view and edit already created documents. Plus, you can use it to insert pictures, tables, diagrams. Word's strengths lie in its ease of use, but it often raises questions for novice users when working with toolbars and formatting. One of them: how to make a vertical sheet horizontal?

Sponsored by the placement of P & G articles on "How to horizontal sheet in Word "How to remove a blank sheet in a Word How to expand a sheet in a Word How to switch to a landscape sheet

Instructions


Sheet positions in Word are called landscape and portrait. The first assumes a horizontal view, the second a vertical one. To flip a sheet, you need to take into account the peculiarities of Microsoft Word of different versions. For example, according to the information on the site www.computerhom.ru, if you are working in Word 2003, then the algorithm of actions will be as follows: "File" - "Page settings" - "Fields" - "Landscape" - OK.

The above steps will change the page orientation throughout your document. In order to flip the sheets in only one part of it, select them. Then proceed according to the indicated scheme, but having selected the desired orientation in the "Fields" tab, indicate the path of application "To the selected text" - OK.

In text editors Microsoft Office Word 2007 (2010), it will be even easier to change the orientation of the sheet. Select the Page Layout tab, then Orientation from the menu bar. After that, a window will open in which select the "Portrait" or "Landscape" option.

If you only need a few paragraphs from a page to change orientation in Microsoft Office Word 2007 (2010), the selection will be placed on a separate sheet. Follow the algorithm: Page Layout (Page Layout) - Page Setup - Margins - Custom Margins. Then, on the Margins tab, select Portrait or Landscape. After that, in the "Apply" list, click "To the selected text". Note that section breaks will automatically appear before and after the snippet. Your document may have already been split into the appropriate parts. Then select the necessary sections and change the orientation only in them.

How simple

Other related news:


When printing a large number of document pages, it is best to number them. In this case, it will be much more convenient to read the document. The procedure for inserting page numbers is slightly different in Word 2003 and Word 2007-2010. Sponsored by placing P & G articles on "How to number


Often, for printing graphs, charts and tables, it would be clearer to use landscape page orientation, rather than portrait (portrait). After all, a horizontally flipped page gives more space for placing captions for graphs and charts and legends for charts and maps. Sponsor


The Microsoft Word text editor has built-in capabilities for different ways placing text on sheets of paper. In addition to using columns and book templates, there are options for placing two pages next to each other in a horizontal or vertical plane. You will need a Text


Unlike word processing documents, tables often require more horizontal space than a standard printed page can provide. If it is not possible to reduce the size of the font used in the table or change the sheet format, then the output is only in the spread of the table by 90 °.


Microsoft Word has many convenient page settings for both reading and printing. In this program, you can change the orientation of pages from portrait to landscape - in some cases, changing a vertical sheet to horizontal can be very convenient, for example, when you want to print


By default, all newly created pages in the text editor Microsoft Word have a "portrait" orientation. But not all documents look the best in this format, so it becomes necessary to expand the page. Sponsored by posting P & G articles on "How to expand a page in word" How


Often, when filling out any documents, you may need to turn the page. MS Word provides this function that allows you to change the orientation of the sheet to landscape or portrait. By choosing portrait orientation sheet, the sheet will be positioned vertically. In the event that you choose



We recommend reading