Galan boilers: characteristics, connection diagram. Galan boilers: reviews. Galan boilers: characteristics, connection diagram Electric electrode boiler galan volcano 25 kW
Electric boiler Galan Vulkan 25 is an electrode (ion) type heating boiler. It belongs to the most economical electric boilers today.
The process of heating the coolant occurs due to the passage of an electric current through the coolant, which sets in motion positive and negative ions... Thus, heating takes place without an intermediary (heating element). The boiler starts working with low currents and as the liquid warms up, these currents become higher and the boiler power increases. The warm-up time is kept to a minimum. Connectivity: Main, cascade, sequential, backup.
The boilers can be equipped with both mechanical and electronic automation... For additional savings can be used with GSM module and room thermostat
Advantages and price of the Galan Vulkan 25 electrode boiler
- Extended manufacturer's warranty. Full technical support.
- It does not require approval for installation with the boiler supervision authorities ("Rules for the construction and operation of electrode boilers").
- Lack of heating element heating element. The process of heating the coolant in the Galan Vulkan 25 electrode boiler occurs due to its ionization, i.e., the splitting of coolant molecules into positive and negatively charged ions, which move, respectively, to the negative and positive electrodes, while releasing energy, i.e. the process heating the coolant goes directly.
- Fine tuning and adjustment. The electric boiler Galan Vulkan 25 is a precisely calculated device that self-adjusts to the required power consumption. When the coolant is heated, its electrical resistance decreases. The electric current passing through the electrodes increases, and the power consumption increases accordingly. The electric boiler begins to gradually "gain" electrical power and give it in the form of heat to the coolant. The total power consumption will depend on the temperature of the coolant set by the consumer and its amount.
- Extended complete set. At the request of the buyer, the Galan Vulkan 25 electric boiler is equipped with automation, which allows the consumer not only to set the desired temperature of the radiators or the temperature of the air in the room, but also automatically maintain it around the clock, turning the boiler on and off.
Specifications Galan Volcano 25
Electric electrode ion boiler
Rated power - 25 kW
Rated voltage - 380 V
Type of current - Alternating / 50 Hz
Heating medium - Water / Galan
Rated current for each phase - 37.9 A
Coolant volume - up to 300 l
Heated room area - up to 350 m2
The volume of the heated room - up to 875 m³
Electric shock protection class - 1
Moisture protection - splash-proof
Connection diameter DN - 32 mm (1 1/4 ")
Overall dimensions - 510 x 190 x 159 mm
Weight - 6.3 kg
Galan Volcano 25 kW is an electric electrode heating boiler (ionic), for heating rooms up to 250 m² with a ceiling height of 2.7 m
Features of the boiler Galan Volcano 25 kW
- The process of heating the coolant in the Galan Volcano electric water heater occurs due to its ionization, i.e. splitting the coolant molecules into positive and negatively charged ions, which move, respectively, to the negative and positive electrodes, while releasing energy, i.e. the process of heating the coolant goes directly, without an "intermediary" (for example, heating element)
- Electric water heater Galan Vulkan is a precisely calculated device that self-adjusts to the required power consumption. When the coolant is heated, its electrical resistance decreases. The electric current passing through the electrodes increases, and the power consumption increases accordingly. The electric water heater begins to gradually "gain" electrical power and give it in the form of heat to the coolant. The total power consumption will depend on the temperature of the coolant set by the consumer and its amount
- Does not require approval for installation with the boiler supervision authorities ("Rules for the construction and operation of electrode boilers")
Galan automation allows the consumer not only to set the desired temperature of the radiators or the air temperature in the room, but also to automatically change it around the clock according to the need, turning the boiler on and off using the Comfort room thermostat.
Now our customers can also remotely control the boiler using the GSM module.
Currently, there are a large number of manufacturers of heating equipment. Most boilers are installed by specialists, in addition, many permits will need to be obtained before installation. But there are also alternative solutions that somewhat simplify the whole procedure. It will be about electric heating. let's consider helpful reviews... Boilers "Galan" - that's what we will talk about in this article.
General information and description
Today the company produces two types of heating equipment: heating elements and electrode boilers. The latter are in high demand. This is due to the fact that it is not necessary to obtain the approval of the relevant authorities, and this, as practice shows, speeds up the installation process at times.
The process of heating such devices looks quite interesting. The principle is to ionize the coolant. It turns out that its ions are divided into positive and negative, respectively, they move to the positive and negative electrodes. The vibrations of the ions lead to the release of energy, and the coolant heats up.
The ionization chamber is relatively small, which has a positive effect on the heating rate. However, such a solution does not always receive unequivocal reviews among consumers. Boilers "Galan" simply do not inspire confidence in someone. This is due to the fact that most buyers are disappointed in the domestic manufacturer. But if you look more closely, you will notice that this company has a fairly high rating. That speaks about the decent quality of the products. Well, now let's go ahead and understand the main points.
Features of the installation of electrical equipment brand "Galan"
It is noteworthy that you can perform the installation manually. This will not only save money on installation, but also gain valuable experience. As noted above, the installation is not that difficult, but it requires basic knowledge of electrical engineering.
We have already decided that there is no need to obtain a permit, nevertheless, it will be necessary to make grounding in accordance with GOST. This is due to the fact that the Galan boiler, the connection diagram of which must include grounding, is powered by a 220/380 V network. For a person, a blow of such power will most likely become fatal. In addition to grounding, grounding is also recommended.
The installation process itself is not much different from the installation of other heating equipment. It is worth noting that it is very difficult to install a thermostat on your own. It must be calibrated by specialists. If you buy a "Galan" (a heating boiler with a climate control sensor), it is better to entrust the installation to professionals. This is due to the fact that if the controller is calibrated incorrectly, then the room will be either hot or cold.
Do not forget that the Galan boiler, the connection diagram of which is given below (in the photo), operates exclusively on water or antifreeze. Due to the use of a different liquid, the equipment will quickly fail, and the case will not be covered under warranty. Well, now let's take a look at a few more interesting points.
Consumer reviews
It is imperative to touch upon such an important point as the responses of buyers of electronic boilers. For the most part, users are satisfied with them. Many write about real savings. In addition, on the network you can find a large number of positive reviews that relate to the service. In addition to fast delivery, the goodwill of the company's employees pleases. But this is where all the fun just begins. There are many reviews about real savings with Galan boilers of the Geyser, Ochag, and other lines. Users manage to achieve a significant reduction in electricity costs. A 15 kW device is enough to heat a two-story house. Agree, this is the best solution, for example, for a summer residence where there is no way to bring a gas main.
And gas does not always look advantageous against the background of Galan electrode equipment. The heating boiler has a high heating rate. Many people also write that it always makes sense to connect an electrode boiler as a backup. If there are problems with gas, then it can become the main source of heat. However, there are other reviews as well.
Galan boilers are very sensitive to voltage surges, so you need a powerful rectifier or an additional generator, which, in the event of a power outage, will keep the boiler running. Many users pay attention to this very moment, since it is quite important.
Electronic boiler "Galan": features
As it has been repeatedly noted in this article, you do not need to obtain an installation permit, which is the main feature of Galan equipment. It is worth drawing your attention to the fact that a boiler of this type, be it "Volcano" or "Ochag", is not only a kind of heater, but also circulation pump... This is a significant cost savings for the user. Electrode heating equipment is extremely accurate and works in automatic mode. The power consumption will depend on what temperature of the coolant you have set. In addition, the equipment independently adjusts to the required operating mode. For example, most boilers work around the clock, but they stand for about 14 hours. In simple words, the device has a sensor that takes the air temperature and sends it to the control element. If it falls to a certain limit, the boiler starts up.
In addition, if you wish, you can get climate control for an additional fee. So you can adjust the room temperature according to a programmed cycle, which will contain weeks, days and even hours. If you want the Galan electronic boiler in evening time worked at a reduced power, then this can be set without any problems to "smart" equipment. All this makes the boilers from this manufacturer unique in their own way.
The smallest and the largest
"Hearth-03" is considered the smallest heating equipment from the manufacturer in question. Its weight may seem ridiculous to you - only five hundred grams. But despite this, the unit develops a power of 3 kW, and this is enough to heat seventy liters of coolant or a room of 25 square meters. The resistivity begins to grow with an increase in the temperature of the carrier; over time, the electrode boiler "Galan" "Ochag" develops its maximum power. For a month of continuous operation this equipment consumes approximately 500 kW.
The company currently offers its customers two configurations: "Standard" and "Lux". The latter, in addition to the boiler itself and the control unit, includes a weekly adjustable climate control program.
As for the most powerful model of the Galan company, it is Vulcan-25. Such equipment is suitable not only for use in an apartment or house, but also for a small boiler room. Unlike the previous version, the nominal voltage is 380V, so you will need a separate power supply. In fact, an electric heating boiler "Galan" "Volcano-25" can heat a room of 850 cubic meters at a monthly cost of 3,000 kW. The volume of the coolant for such a boiler must be at least 150 liters and not more than 300 liters.
Advantages and disadvantages of Galan boilers
We emphasize that you need to buy heating equipment only after reading the full list of the pros and cons of such devices. If we talk specifically about the products of the Galan company, then, first of all, it is worth noting the significant savings in electricity. The fact is that the electrode equipment allows you to set the minimum temperature during the absence of people in the house. This approach solves two problems at once: firstly, electricity is saved, and secondly, a normal temperature is maintained in the dwelling. This can be achieved with the help of thermostats, which are located in each heated room. Periodically, the sensors take readings and analyze the information. Another important point is that you do not need to install a chimney and store fuel, as is the case with coal. Among other things, the connection of the Galan boiler can be performed without the participation of specialists, and dirt and dust do not accumulate in such a device.
As for the shortcomings, then, of course, they also exist. The main disadvantage is that the equipment is extremely sensitive to voltage surges, in particular to power surges, which can ruin both the protection and the filling of the equipment. This problem is solved by installing a stabilizer.
Another disadvantage is that some models require a high-quality coolant. It can be distilled water or antifreeze. Now let's take a closer look at how to properly install such boilers.
About installation in detail
Today there are four types of connections that are actively used:
- parallel;
- standard;
- floor heating;
- modular.
The most popular are parallel and standard connections. Let's take a look at how to connect the boiler in this way.
The first step is to decide on a suitable place. Then, using a comb, we connect the main device, which is necessary for the distribution of water or antifreeze through the radiators. The latter have special taps that can be used to regulate the amount of heat carrier passing through.
Please note that the scheme of the Galan boiler of any model implies the installation of a system for bleeding excess air from the system. This will help keep the equipment in good working order and prevent premature failure. At the final stage, the boiler will be connected to the network.
Do you want to connect the boiler to the underfloor heating system? Please do the following. Connect the air extraction devices to warm floor... Install sensors that monitor temperature and pressure. Then install the controllers in the niche and connect the device to the network. Remember that installation is necessary only when you have experience in carrying out such work, in other cases it is better to involve specialists, since you are dealing with electricity. Failure to comply with basic safety rules can lead to injury and even death due to electric shock.
A little about the price of equipment
As noted above, there are various Galan heating boilers. Today the company sells units model lines"Ochag", "Geyser" and "Volcano" with a capacity of 3, 5, 9, 15 and 25 kW.
Smaller models are suitable for small spaces, and the most powerful boilers can heat huge spaces. The price of the units fluctuates depending on their efficiency. Electrode models will cost at least three and a half thousand rubles, and a maximum of fifteen thousand. Consider the fact that there are different configurations. For example, only a boiler and automatic equipment are supplied in the base one, in the more expensive one there is also climate control.
Particular attention should be paid to the fact that today there are more cases of fraud. For this reason, it is worth checking the quality of the product very carefully. By the way, in addition to the ideal technical condition of the device, its passport should also be in perfect order. If the company has a license and positive reviews, which is important, then you can safely make a purchase. In conclusion, do not forget to clarify the features of the boiler return procedure if it turns out to be of poor quality or defective. And don't be tempted too low price... Purchase only original Galan heating systems. Reviews of the owners of such equipment will tell you where to look for a quality product.
A very important point
Despite the fact that the boiler itself is relatively small, it must be installed correctly. Prepare the niche in advance and provide free access to the network. Do not forget that the equipment is powered by a three-phase network. As noted above, antifreeze or drinking water can be used as a coolant. The resistivity of the liquid should not be less than three and more than thirty-two thousand Ohm / cm at a maximum temperature of 150 degrees. By the way, the quality of the media can be improved. Thus, you will extend the life of the boiler. This is quite easy to do. You can install a filter for cleaning mechanical impurities, which is desirable to be mounted on the pipeline. A significant amount of insoluble compounds will be retained, which will have a beneficial effect on the durability of the equipment.
Above, the Galan boilers were considered in detail. Hardware specifications vary by model. But generally speaking, such devices can be used to heat a room ranging in size from 75 to 550 cubic meters. In this case, the power varies from 3 to 25 kW. But how much you save depends only on the insulation of the room. Some users report savings of 45% compared to gas equipment. This is more impressive than the numbers, but not everyone is able to achieve this. But everyone can cut costs by 5-20%, the main thing is to correctly install and calibrate the electronic equipment.
Conclusion
We have considered all the most common questions and will make a completely logical conclusion that with the proper quality of the electric main, such a boiler can be installed. Of course, such a solution will not work if you live in a place where a large load on the network or the voltage does not reach the prescribed 220 V. In this case, a stabilizer can help out. By the way, the best solution as an alternative heat source would be the "Galan" boiler "Ochag-3". Owner reviews indicate that in difficult times it will come in handy. Even a high-power heater will not replace a three-kilowatt "Hearth" for you.
This concludes the story about electrode boilers from this manufacturer. Equipment of such a plan is becoming more and more popular every year, especially for country houses and summer cottages where there are no gas mains. Moreover, it is possible to combine electrode boilers with each other and create a full-fledged boiler room.
The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to its simplicity and ease of calculation.
Payment by credit card to the courier upon receipt
Couriers have a portable banking terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).
Payment by credit card on the website
To select payment with a bank card on the "Cart" page, you must select the item "Payment by bank card on the site".
Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:
After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia to enter the details of your card.
Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.
If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and the possibility of obtaining passwords for making online payments at the bank that issued the card.
This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia. The entered information will not be provided to third parties, except in cases provided for by the legislation of the Russian Federation. Bank card payments are carried out in strict accordance with the requirements of Visa Int. and MasterCard Europe Sprl.
When paying by credit card, no interest is charged.
Payment is a transfer of funds from the buyer's current account to the seller's account, we work on a common taxation system with VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used in the calculations by legal entities.
Our details
Limited Liability Company "Teplovod-Service"
OGRN: 1105003006162
INN: 5003088884
Checkpoint: 500301001
BIK: 044525225
Bank: PJSC "Sberbank of Russia"
R / s: 40702810838060011732
K / s: 30101810400000000225
Yur. the address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoe highway, 21 km., Office B-6
Special conditions
- Any item shipped by the shipping company requires 100% payment.
For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.
For goods with the "On order" status over 100,000 rubles. an advance payment of 30% is required.