Water heater Atlantik: review of models, technical characteristics. Review of Atlantic electric water heaters Atlantic boiler official

The French company Groupe Atlantic has been actively developing for many years and is even recognized as the best in Europe thanks to innovative patented technologies that provide high quality and product reliability. Electric water heaters Atlantic occupy a key place in the production line of manufactured equipment.

By the type of placement, horizontal and vertical are distinguished:

In the first, the heating element is located on the side, which significantly slows down the work. The upper and lower nozzles are located at a close distance, as a result, the mixing of cold and hot water flows occurs in the tank itself, and not in the mixer - it can be sharp jumps at the outlet by temperature. At the same time, models of this type are popular due to their compactness and the possibility of placing them under the ceiling, which significantly reduces the occupied space.
Atlantic vertical water heaters in all respects are not inferior to horizontal ones, but they are cheaper in cost. The heating element is located in the lower part of the body, where the cold stream descends, as a result of which the water is heated faster.

By the type of heating element, the company provides the consumer with water heaters with "dry" heating elements, enclosed in a ceramic flask, and immersion.

Selection criteria

To select the correct boiler, you need to determine the basic parameters:

The volume of hot liquid, which depends on the number of consumers. The average need for a shower by one person is 20 liters, for household needs - about 12. For a family of 3, a water heater of 80 liters is enough. It should be borne in mind that the larger the volume, the larger its dimensions.
Water quality in the region. Hard water promotes the active deposition of insoluble mineral salts on the inner walls of the tank and the heating element, which shortens its service life.
Power according to the capabilities of the mains. For faster heating of water, models of 2-2.5 kW are chosen. In houses with old wiring, you need to choose less powerful ones - 1.2-1.5 kW, so as not to overload the power grid, but the operating time will increase significantly.

The latest techniques for comfort

Since the launch of the first series of water heaters in 1978, the company has been actively developing its potential in the field of the latest technologies and training of specialists. Initially, storage boilers were manufactured from regular steel, so over the next decades, Atlantic's focus has been on quality and enamel application. In what they have succeeded a lot - the coating of the new generation contains zirconium in its composition, due to which it has improved anti-corrosion properties: a homogeneous adhesive layer, unique strength and elasticity, which are able to maintain their characteristics throughout the entire service life of the water heater.

O'Pro technology balances the anti-corrosion protection of the heating element and the inner tank. The compensation ohmic resistance system is built into the direct immersion element (wet heating element). The parameter equal to 580 Ohm reduces the electrical potential between the magnesium anode, copper heater and water tank, prolonging the life of the entire device.

To work effectively in hard water, the company uses Steatite technology: the heater is housed in an enamelled steel flask that protects it from direct contact with water. Dry heating element provides an increase in the heat exchange surface, thereby reducing the amount of mineral deposits and the noise level.

Overview of boilers Atlantic

The range of water heaters includes three lines: Classic, Advanced and Premium. The first consists of efficient, simple and lightweight direct immersion heaters. The economy class series is represented by two models - Ego and E-Series.

Water heaters of the Atlantic Advanced line, thanks to the use of O'Pro corrosion protection, meet the highest requirements:

The unique ohmic resistance technology is also used for compact water heaters:

New developments of water heaters with ceramic dry heating elements are presented in the Atlantic Premium line. Thanks to unique technology models in this series are designed to work with hard, highly mineralized water.

Price comparison for water heaters

The range of water heaters is designed to meet any needs and financial capabilities of potential buyers. Despite the attitude to the budget class, the price of Atlantic Ego 80 liters practically does not differ from the more progressive version of O'Pro + of the same volume.

The cost of services for connecting an electric water heater ranges from 1,800 to 3,500 rubles and depends on the type and amount of work performed.

Electric boilers are good because they are quite simple to use - just connect them to the power supply. Moreover, they are safe and effective. The French manufacturer Atlantic confidently holds the leadership among manufacturers of this kind of water heaters, offering consumers products of excellent quality and design.

High-quality water heater Atlantic and its advantages

The French company Atlantic, which produces boilers for heating water, is very popular among consumers. This is accompanied by the fact that this company has been on the market for quite a long time and has established itself from the best side.

Atlantis heating devices are manufactured in cylindrical and square shapes. These devices are most often used in apartments and private houses.

Advantages of using Atlantik boilers:

Quite affordable price;
Fast heating of water;
Corrosion resistance;
Profitability;
A wide range of models for every taste;
Stylish design that can match almost any room decor.

However, annual cleaning will help to avoid the latter, for which you can call a master, and the problem will be solved.

Before deciding to buy a water heater of any company, you should figure out what they are and understand the nuances of their work.

Water heating tank Atlantic can be:

Horizontal- in this case, the heating element at the device is on the side, and the water inlet pipes are very close, therefore, the liquid is mixed in the structure itself, which can cause sharp temperature jumps at the outlet. But at the same time, such models are compact and they can be placed under the ceiling, thereby not taking up much space.
Vertical- costs less than horizontal. The heating element is located at the bottom of the unit, where the cold flow of liquid enters. Thanks to this, the water heats up faster.

Heaters Atlantik can have a dry heating element, enclosed in a special flask or immersion.

In order not to be mistaken in choosing a unit, you should consider:

The need for heated liquid, which directly depends on the number of its consumers. For example, the average amount of water for bathing one person in a shower stall is about 30-50 liters, while washing dishes and hands takes about 20.
The power of the device and its compliance with the permissible network load. In order for the water to heat up as quickly as possible, models with a power of 2-2.5 kW are often taken. But if you have old wiring in your house, do not overclock too much. It is better to take a 1.2-1.5 kW unit, however, the heating time will increase in this case.
Location of the device. If there is not enough free space in the room where the unit is planned to be installed, it is better to choose a horizontal model.
Water quality. If it is too hard, then the tank will have to be cleaned often due to the scale appearing on its walls, which will shorten the service life of the device.

When choosing a water heater, special attention should be paid to the volume of the container. The tank, designed for 50 liters, is enough for one person or a couple who are at home mostly in the evening. 80 liter tanks are more voluminous and roomy. It is convenient to buy them for a family of 2-3 people who are often at home.

A 100 liter boiler can be connected to various liquid supply points, while allowing them to be used at the same time. This volume is quietly enough for 3-4 people. The instruction will help to understand the connection of the device.

It is not advisable to purchase equipment in unsuitable places or in points where there are no certificates of conformity to GOST.

Popular water heater Atlantic: lineup

If you decide to purchase an Atlantic boiler, it is worth examining the popular models of these water heaters to determine what you need.

Today there are three common lines of these boilers:

Classic- very affordable water heaters. Their design consists of a copper heating element and a magnesium solution in the tank, which prevents corrosion from forming. But, nevertheless, cleaning is still necessary.
Advanced- this series is characterized by a ceramic heating element with an immersion heating element. These models are in good demand among consumers and, as a rule, receive only positive reviews.
Premium- as the name implies, the heaters in this line are available at a higher price. This is due to the presence of a titanium anode in the system, a ceramic heating element and a special anti-corrosion coating.

Like any other equipment, Atlantic boilers can fail. In this case, it is better not to try to make repairs with your own hands, but to call a specialist who can competently and quickly repair your equipment.

Boiler Atlantic 80 liters: what is good about dry heating elements

Water heaters Atlantik can be both with immersion and dry heating element. Moreover, the latter are considered more popular models. How does this happen?

Advantages of dry heating element:

Longer service life - this is due to the fact that it is enclosed in a special flask and does not come into contact with the liquid, which means it is not affected by it;
Lack of scale on the element;
There is no need to regularly clean the device or use any means to improve the functioning of the unit;
The cost of dry heating oil is cheaper than "wet".

By the way, if the dry type heating element breaks down, it will be quite easy to get to it. And you don't have to spend a lot of time looking for a replacement or repairing a part.

And yet, despite the indisputable advantages, a water heater with a dry heating element has one drawback - the water in such a boiler heats up rather slowly, since the heating element is located in a separate container, and not in water.

Features of the Atlantic boiler (video)

If the quality of the device is in the first place for you, then you should pay attention to Atlantis boilers. They are reliable, durable, comfortable and easy to use. Thanks to the wide range of manufactured models, you can choose exactly the device that you need.

A water heater is an important element in those houses where there is no water supply or there are interruptions in water supply. Unfortunately, many consumers, when choosing a suitable model, are immediately lost or make a bad choice. Water heaters manufactured by Atlantik are very popular among buyers. In order to understand the reasons for this success, we will consider the features of this product, as well as positive and negative reviews about water heaters with dry heating elements.

Features of dry heating element

Regardless of the price, the characteristics of the water heater and the manufacturer, all boilers are conventionally divided into only two types: with a traditional heating copper element ("wet") and with a "dry" heating element.

The predominant part of water heaters (and Atlantik water heaters as well) in their design have a long-known "open" or as it became in Lately name - "wet" heating element. It is represented by a tubular electric heater made of copper, which is in contact with water.

Such a device is in fact the most inexpensive and most commonly used. But, perhaps, the low price is its greatest advantage. The fact is that due to the galvanic current, corrosion appears on the surface of the steel case. As a result, the service life of the heating device is significantly reduced. And if we are talking about hard water, then over time, mineral deposits will appear on the surface of the heating element.

Dry heating element

The "dry" (closed) heating element is fundamentally different from the open one: it is completely isolated from the water in the tank. This means that contact with her is completely excluded. Dry heating elements for Atlantik devices were created using a unique patented technology (Steatite). They are made of ceramics and are located in a special flask made of steel (it is in the tank). Due to this feature, water heaters with dry heating elements Atlantic serve much longer than conventional ones.

The ceramic heating element deserves special attention... It is a unique development of the Group Atlantic group of companies. It is made of magnesium silicate, which is pressed under high pressure. Magnesium silicate is a unique material that is considered an excellent heat conductor and can tolerate high temperatures.

Pros and cons of water heaters with dry heating elements, model range

Usually manufacturers give a small guarantee for their products (on average, about 3 years). Atlantic offers a seven-year guarantee, which is impressive. And all this thanks to the advantages of this device:

steatite heating element in Atlantik water heaters has a significant heat transfer area, so the water heats up quite quickly;
the heating element cools down very slowly, respectively, the water remains hot longer, and electricity is saved at the same time.
TEN is not afraid of mineral deposits;
The heating element is easy to replace, because for this you do not need to drain the water from the tank;
maintenance of water heaters is carried out only once every 2 years;
long warranty for the device.

Among the disadvantages of the considered water heaters, only their price can be noted, but the economy of devices, a long service life, as well as the lack of the need for frequent maintenance makes them a more profitable purchase compared to conventional boilers.

Dry heating element will last longer than "wet"

The manufacturer has put on the market several series of water heaters of the type in question:

Steatite. This series presents stylish cylindrical boilers mounted vertically. The volume of water tanks is 50, 80, 100 liters.

Steatite Slim. This category features compact models that are ideal for small bathrooms.
Steatite Cube. The category is represented by several types of models, some of which are mounted only vertically, while others are universal.

Advice. If, when choosing a suitable boiler model, its economy plays a significant role for you, you should pay attention to the S4CM models with horizontal installation, capable of heating water in the tank 30% faster.

Steatite Exclusive VSRS. Boilers in this category are suitable for use in large rooms (often commercial).

Water heater Atlantic

Combi Steatite ATL MIXTE. The newest category of all presented. This is a combined option that is used when installing a single-circuit heating boiler. By the way, the installation of these boilers does not require an installation permit.

Customer reviews of water heaters Atlantic

Comparing all the positive and negative reviews about the Atlantik heating tanks, we can note several points common to almost all reviews. Let's start with the bad ones. For the most part, consumers note periodic malfunctions in the operation of electronics and a decrease in the amount of water heated by the tank. By the way, with a sharp decrease in the amount of warm water in the tank, most often you should look for the reason in the factory marriage of the thermo unit. In other cases (according to the reviews of specialists in the installation of water heaters), unskilled work of installers takes place.

Among the majority of positive reviews about the water heater, the undoubted advantages of the device can be noted: the speed of heating the water and the "tenacious" heating element.

Advice. For those who have purchased or are planning to purchase a model with a "dry" heating element for the first time, advice on the features of the operation of such a water heater will not be superfluous. If you want the purchased boiler to last as long as possible, do not forget about replacing the magnesium anode and periodically cleaning the tank (meaning the inner surface).

This concludes our acquaintance with the features, device and reviews of Atlantik water heaters with "dry" heating elements comes to an end. Happy shopping!

Dry water heating heating element: video

Electric boilers from the French brand Atlantic are characterized by a good combination of price and quality. They are presented in a limited number of models with tank volumes up to 200 liters. Boiler "Atlantic" will be the smart choice for the budget-conscious buyer. Its purchase will not hit your pocket, and the carefully thought-out design will ensure a long service life of the device.

Varieties and features

The French brand "Atlantic" presented three main types of boilers for the choice of users:

Electric - use only electricity for power supply.
Indirect heating - they take heat from heating systems.
With heat pumps - an environmentally friendly series that uses heat from the environment to heat water.

In our review we will touch upon the Atlantic electric and indirect boilers. We will consider both simple models, made in cylindrical cases, and design ones, which differ in good quality. appearance and well-thought-out ergonomics. Their production involves the developer's proprietary technologies - Diamond-Quality tank protection, Smart Control control system, Steatite dry heating elements, ACI Hybrid and O'Pro corrosion protection technologies. They make it possible to manufacture reliable and durable water heaters.

Popular models

Let's move from words to deeds and consider the most interesting and popular models. These include water heaters for 10 and 100 liters, design samples, products with powerful tank protection, as well as devices with dry heating elements. Along with descriptions of boilers "Atlantik" their detailed specifications.

"Atlantic" O'Pro Small PC 10 RB

A baby water heater with a volume of 10 liters opens up an overview. Its tank is enclosed in a barrel-shaped body and equipped with a protective glass-ceramic coating. A magnesium anode is responsible for additional protection against rust on the welded seams. The power of the heating element is 2 kW, which ensures fast water preparation. Distinctive feature device - the ability to operate in rooms with increased level humidity.

Water heater "Atlantik" O'Pro Small PC 10 RB heats water up to +65 degrees and maintains pressure up to 8 atmospheres. The heating time to the maximum mark is 19 minutes. The boiler is well suited for suburban operation and will help out during periods of hot water supply outages in large cities. The estimated cost of the baby is 4500 rubles.

Before us is a boiler "Atlantic" for 80 liters - this volume is enough for a family of 2-3 people. The key feature of the model is a dry steatite (ceramic) heating element. To protect against corrosion, the Diamond-quality technology is used, which implies the application of a special enamel that is resistant to corrosion on the inner surface of the tanks. The water heater is installed in two positions - vertical or horizontal. It does not take up much space, as it is made in a thin elongated case.

A heating element with a capacity of 2.1 kW is responsible for the rapid preparation of hot water. It does its job well, which is confirmed by user reviews. The maximum heating level is +65 degrees at a pressure in the tank up to 8 atmospheres. The applied control system is mechanical, with an indication of switching on, a thermometer and a heating limiter. The approximate price in Russian online stores is 10-11 thousand rubles.

Atlantic Steatite Elite 100

Water heaters "Atlantik" with dry heating elements are distinguished by increased resistance of heaters to corrosion. For this, the heating elements are put into protective housings, which excludes their contact with water and further destruction. The presented model is made using exactly this technology and has a capacity of 100 liters. The time for heating the water to the maximum mark is 246 minutes, which is a lot. It's all about the too low-power heating element - its power is only 1.5 kW.

The storage tank is protected by a durable glass-ceramic coating and equipped with a magnesium anode. Several degrees of protection make it resistant to corrosion, not sparing even the most durable alloys. The volume is enough for any needs - washing dishes, taking a shower, washing hands. The approximate cost of a model from the French brand "Atlantic" is 11.5 thousand rubles.

"Atlantic" Ingenio VM 080 D400-3-E

Before us is a typical boiler "Atlantic" for 80 liters of water. It has the following characteristics:

Advanced electronic control with Smart Control energy saving system.
O'Pro passive anti-corrosion system.
Convenient parameter control with liquid crystal display.
Adaptive water heating control.
Glass ceramic tank protection.
Heating element power - 2 kW (not dry).

The boiler is mounted on the wall in a vertical position, the pipes are supplied from below. The weight without water is 22 kg, which reduces the load on the walls. For the convenience of users, the 80-liter Atlantik water heater has been supplemented with the function of accelerated water heating - the maximum temperature level is +65 degrees. The pressure in the tank should not exceed 8 atmospheres. You can buy this model in domestic online stores for only 8,500 rubles.

"Atlantic" Vertigo 80

The storage boiler Atlantic Vertigo for 65 liters is made in a vertical rectangular case that fits optimally into any design. The developers have endowed the device with a double steatite heating element of increased power - 2.25 kW, the function of quick preparation of water for taking a shower has been implemented (it heats up in 30 minutes). Due to the resistance of the heating element to corrosion, the boiler can operate with high water hardness values.

This advanced model has been endowed with convenient electronic control with the Smart Control energy-saving system. It is easy to select and control the temperature here, to enable additional options. The system itself adapts to water consumption, choosing the most economical operating modes. The boiler is mounted both vertically and horizontally. The time for heating the water to a maximum is 79 minutes. The inner tank is divided into two parts to realize the fast heating function.

Stylish thin body, high power of the protected heating element, advanced electronic control system - all this influenced the cost of the Atlantik water heater. Its price in stores is 18-20 thousand rubles.

Author's design from French artists and advanced development technologies - these are electric water heaters from the Atlantic brand. On the pages of our online catalog, you can find and buy devices equipped with useful functions and smart capabilities. It should be noted that the equipment is available not only in Moscow, but also throughout Russia: we will deliver your purchases to even the most remote region.

Features of boilers Atlantic

The enthusiastic reviews of equipment users allow us to safely say that water heaters from this brand perfectly combine high consumer characteristics and an adequate price. The production facilities of the company are mainly concentrated in France. This means first-class European assembly of equipment and full compliance with the multiple quality standards set by the international market.

Model range of water heaters Atlantic

The brand can provide customers with solutions for any occasion. The arsenal includes household electric water heaters of accumulation type and indirect heating boilers. The most demanded capacity: from 10 to 300 liters of usable volume. Placement can be carried out on the floor or wall, and the models can be vertical and horizontal, as well as universal.

Atlantic has developed several lines and continues to expand its range. Among the equipment, you can find a variety of designs and built-in comfort and protection functions:

With uncoated stainless steel tank or coated with Diamond-quality high-strength enamel.
With a simple mechanical control or with an electronic control and regulation system.
With the function of accelerated heating of water in the tank.
With double steatite heating elements "dry" type (do not come into contact with the water in the tank).
With the exclusive O "Pro anti-rust protection, developed by Atlantic.

The boilers are well suited to work with water that is hard, soft or with a high mineral content. Internal storage tanks are perfectly sealed and reliably protected from leaks. The integrated energy saving functions allow users to obtain hot water with minimal power consumption. And the high class of protection against water and electric shock guarantees safe operation.