Toilet cistern sweats what to do. Why does the toilet cistern sweat and how can condensation be eliminated? If your toilet cistern is sweating, you need to urgently check the health of the ventilation system in the bathroom.

The operation of plumbing fixtures in the bathroom or in the toilet is sometimes associated with rather specific problems. This concerns the accumulation of moisture on the toilet cistern. To eliminate such unpleasant phenomena, it is necessary to understand exactly what factors led to the occurrence of such inconveniences.

Causes of occurrence

Condensation on the toilet cistern contributes to the formation of a high level of humidity in the room, due to which dampness appears, as well as an unpleasant odor accumulates. Such a microclimate makes the components of plumbing equipment made of metal unusable, provoking the formation of rust and corrosion. And this is already fraught with all sorts of problems, ranging from small drips on various surfaces in the room, to the formation of leaks and other more serious breakdowns in the toilet. For residents, mold and other microorganisms will be dangerous, for which such conditions are most favorable for reproduction.

Most often, condensation forms where there is a temperature drop, and due to their properties, bathrooms and toilets are just such a room. As a rule, the temperature in the bathroom is sometimes quite high, especially in winter. And the water that produces the toilet flush is colder, it will not be difficult for it to cool the tank itself quickly enough.

There may be several reasons why excess moisture collects on the toilet.

Frequent use of the device, due to which the water entering it cannot be heated to the optimal room temperature. Plumbing is used many times more often in residential premises where a large family lives than in apartments where one or two people live. Frequent draining of water contributes to a noticeable difference in temperature between the water from the pipeline and the temperature in the living room.

The appearance of malfunctions in the drain system, as a result of which water with a normal temperature leaves, and the missing volume is replenished with chilled from the pipeline. Various breakdowns of shut-off valves entail the provision of a toilet cistern cold water, in winter its temperature is about 3 degrees Celsius, and the room in winter warms up to temperatures exceeding 20 degrees. The difference of 15 degrees or more contributes to the accumulation of condensation on the surface of the toilet, which sweats.

High humidity in the room. Often, a bathroom in an apartment is combined with a bathtub, where a dryer for clothes is additionally located. The presence of a damp cloth, water dripping from pipes, as well as the combination of these phenomena, significantly increase the concentration of moisture in the air. Plastic and ceramic surfaces prevent it from drying out, so they become covered with drops.

Faulty ventilation of the toilet room or its absence. There are times when a special window for ventilation is tightly sealed up during repair work. This entails a failure in air circulation, and excess moisture from it condenses onto the surface of the cistern.

Arrangement of the bathroom in such a way that in the immediate vicinity of the toilet there will be many pipes with hot water supply, heating radiators or towel dryers.

After identifying the cause that contributes to the fogging of the toilet cistern, it is necessary to take measures to combat the phenomenon of condensation.

Troubleshooting

First of all, you need to check how well the tank itself is functioning. The technology for performing such work is not particularly difficult. To do this, it is necessary to observe a little how the mechanism performs its functional tasks.

When the toilet is not in use, but water still flows out of the tank, even if it pours in a small trickle, the drain system needs repair. Such a leak can be determined by the formation of a trace of water, which eventually appears inside.

To fix the problem, you will need to check every detail of the device.paying particular attention to the connecting elements and inlet fittings. If it is not possible to cope with the task on your own, it is better to use the help of a specialist who can perform both diagnostics and elimination of breakdowns. Calling a plumber is an ideal solution for users who lack knowledge and practical experience to get rid of a breakdown in plumbing. The repair will fix the problem and resolve the issue with the wet tank surface.

If the problem is too frequent use of the toilet, then installing a two-stage button on the mechanism can help. The latest models of plumbing devices are initially sold in this configuration. The button can be easily purchased at any building supermarket, the cost of the product is quite affordable for most consumers.

Thanks to the installation of the button, it becomes possible to drain only a certain part of the water that is contained in the toilet cistern. The button is a system that consists of two drain modes - full and partial. This feature makes it possible to save water, which is relevant today for most owners of apartments and houses, and also allows the incoming liquid to warm up over time. This will reduce the likelihood of moisture building up on the surface of the toilet.

Ventilation

Sometimes the reason for the accumulation of condensation is not the mechanism of the plumbing device itself. The question may be related to other issues, such as high humidity levels. This phenomenon is often the root cause of moisture accumulation on the outer surface of the tank.

Competent arrangement of ventilation in the bathroom and toilet will help not only get rid of fogging different devices in these rooms, but also to optimize the microclimate throughout the home.

The first step is to resort to installing a fan with good power., which is installed in a circular slot in the wall. Now many types of ventilation devices can be easily connected to light switches in the room, so that they will carry out their work when the lighting in the bathroom is turned on. Moreover, the installation, tied to the lighting, can also be carried out in the reverse mode of the fan's operation - that is, the mechanism will begin to supply fresh air when the light in the room is turned off. In light of the fact that ventilation devices still make noise during operation, models that will work with dimmed lighting are more in demand.

In order for ventilation to help reduce moisture levels and airing, certain door models are often installed in bathrooms and toilets, which have special grills or openings for air circulation. Such design features of the door leaves provide a free exit for humidified air from the room, which, in turn, quickly enough mixes with the general microclimate in the apartment.

It will not be superfluous to additionally clean the ventilation ductsleading to the bathroom, air exchange in the dwelling also depends on their condition. Lack of traction will indicate that the channel is clogged.

Another factor affecting the operation of general ventilation in an apartment may be the closing of the window with any material. The plug must be removed as ventilation in the bathroom is mandatory. In the first time after the acquisition of living space, this factor could simply not be paid attention to. However, it can cause a number of unpleasant phenomena in the future, among which the main ones are condensation, fungus, an unpleasant smell in the room, and corrosion of water pipes.

The hole is sometimes sealed for aesthetic reasonswhen the window for ventilation does not meet the requirements of the owners in appearance. But today, there are a lot of options for beautiful ventilation grilles on sale that will make it possible to give this mandatory component a neater look that does not attract too much attention.

How to raise the water temperature?

The next way that will help fight strong condensation is to increase the temperature of the liquid in the toilet bowl. This can be done by ensuring that the tank is filled with slightly warmed water. This technology will be very useful for the winter season.

Warm fluid can be accessed into the system in the following ways:

Purchase of a water heater that will heat the liquid before it is poured into the tank.

Insulation of the pipe through which the liquid flows. This method is notable for a fairly affordable price, but it will require a number of works. First of all, you need to buy the insulation material with which the supply pipe is wrapped.

Reduce the pressure with which water enters the apartment. This will slow down the filling rate of the tank, allowing the water to reach room temperature faster.

Many professionals prefer the installation of a double cistern.Although the products appeared on the market not so long ago, they are already in great demand, since they are considered the latest alternative development in the field of plumbing fixtures. The high cost of products is justified by its effectiveness, since the toilet bowl does not "sweat" due to the peculiarities of its design.

The device is a reservoir made of plastic and a casing with an air gap. This configuration feature will help make the difference between temperatures completely negligible, which eliminates the risk of moisture build up on the device.

Condensation on the toilet cistern is perplexing for many homeowners. Due to droplets of water constantly flowing from the surface of the cistern, puddles form on the floor, which must be wiped off in time. Otherwise, dampness will lead to mold and unpleasant odors. Of course, you can adapt some container to collect water, and then remember to empty it from the contents in time. Many housewives do this, trying to solve this problem in this simple way. Men try to find out why the toilet cistern is sweating in order to eliminate the cause and forget about the problem forever. Are there effective ways fight against condensation that periodically appears on the toilet cistern? Let's figure it out.

Reasons for the formation of condensation on the drain tank:

High level of humidity in the bathroom and in general throughout the apartment. High humidity can be caused by a large amount of indoor plants, drying a large amount of wet laundry, leaking water pipes or heating systems and other factors.
The continuous flow of cold water into the toilet tank for a second due to a malfunction of the shut-off valves, as a result of which the water does not have time to warm up to room temperature.

To understand why the toilet cistern sweats, you need to remember a little school course physics. The contact of warm and moisture-saturated air with cold surfaces inevitably leads to the appearance of water droplets on them. This means that it is necessary to look for ways to dry the air, as well as increase the temperature of the surface of the drain tank.

Checking the condition of the ventilation holes

To reduce the level of humidity in the air, it is necessary to adjust the ventilation of the bathroom. Each apartment has special ventilation "windows" that provide air circulation. In pursuit of the beauty of the interior, some tenants seal these holes with finishing materials, which, of course, is unacceptable.

To mask ventilation windows, it is necessary to buy decorative grilles that are specially designed for this purpose. They can be matched in color, shape, and design. Before installing decorative grilles, clean the ventilation ducts from debris.

Installing a fan that turns on when the light is turned on will help partially solve the problem of condensation.

Ventilation of air in the room can be organized even more efficiently if a forced ventilation system is connected. To calculate the capacity of the ventilation system, you must contact a specialist. After assessing the state of the bathroom and the intensity of its operation, professionals will give recommendations on the choice of equipment.

Repair of faulty shut-off valves

If the flush mechanism breaks down, then the water in the toilet flows without stopping. This leads to constant replenishment of the tank with cold water, which lowers the surface temperature. In this case, the condensation process is ongoing. The problem can be eliminated only during the repair of the shut-off valves or its complete replacement. To carry out repair work on their own or to invite a plumber, each homeowner decides on his own, based on the financial capabilities of the family.

In addition to partially eliminating the condensate problem, repairing the tank drain mechanism will lead to savings in water consumption. This is especially true for the owners of those apartments in which metering devices - water meters - are installed.

Double-walled cistern

Manufacturers of modern toilet bowls are aware of the problem of condensation and offer their own effective solution. The latest models of toilets are available with an improved cistern design that prevents them from "crying".

The double-walled cisterns of modern toilets never sweat

In these models, an additional plastic container is inserted inside the tank, the walls of which do not come into contact with the ceramic surface of the product. As a result, its temperature is always constant and equal to room temperature. This constructive solution allows you to solve the problem once and for all. However, for many buyers, these models remain unaffordable at a cost that is several times higher than the price of conventional toilets.

Some amateur craftsmen try to isolate the walls of the tank from the effects of cold water with the help of heat-insulating materials that are glued to them from the inside of the container. However, this technology does not completely solve the problem of condensate.

Some amateur craftsmen try to deal with condensation on the tank by pasting its inner walls with heat-insulating material

If expensive “not crying” models are still too expensive for you, then try installing forced ventilation. Even a simple fan inserted into the ventilation window and turned on when the light is turned on in the bathroom will solve the problem of condensation on cold surfaces. If the toilet cistern is still sweating after that, then call specialists to install more powerful ventilation systems.

Often, the owner of an apartment has a question about what to do if the toilet tank is sweating.

At first glance, it may seem that the question is completely trifling and its solution is not worth a damn.

However, many years of experience show that this problem is much more complicated than it seems.

As a result of increased humidity in the room, a favorable environment is formed for the formation of mold and mildew.

A toilet cistern is a device that is operated many times a day. And if you don't take timely action, big trouble can follow.

Causes of condensation

Before taking on the elimination of this trouble, you need to find out why condensation forms on the toilet cistern and on the adjacent pipes. There is no secret here.

The cistern is sweating for two reasons:

high air humidity;
low temperature of the water entering the tank.

According to the elementary laws of physics, when warm, vapor-saturated air comes into contact with a very cold surface, water drops form on this surface - the tank "sweats".

Over time, puddles accumulate from the drops, which again saturate the air in the bathroom with moisture. In fact, a miniature water cycle is formed in a confined space.

It's unpleasant to live in such an atmosphere. However, before doing anything, you need to conduct a survey of the room.

If the water pipes have been serving for more than a decade, then you need to carefully inspect them for leaks.

The next step is to check the serviceability of the shut-off valves in the toilet cistern.

Then you should pay attention to the quality of ventilation in the bathroom. If stagnation is observed here, then natural or forced air currents should be formed.

The inflow of fresh air and the extraction of stagnant air will reduce its humidity.

What is the best way to eliminate fogging?

To stop the cistern from sweating, you can limit the drainage each time you use the toilet. At the same time, the flush quality should not decrease.

Today, on the plumbing market, you can purchase a cistern with two buttons.

Such a flow rate control system allows you to use the entire volume of water from the tank or only part of it. However, simply changing the toilet may not do the trick.

And before making a replacement, you need to make sure that the decision is correct. The simplest steps should be taken to help determine the real reasoncausing the toilet cistern to sweat.

Ventilation cleaning

In the houses of the old construction, natural supply and exhaust ventilation was provided.

The level of development of building technologies did not allow the use of more efficient methods, such as forced ventilation.

In order for the ventilation mechanism with natural motivation to work effectively, it is necessary to ensure the flow of air into the room from the outside.

Air from the street entered through the cracks in the door and window openings. And if these inflows of air for some reason disappear, then this natural movement stops.

This often happens when plastic windows are installed in the apartment.

Long-term practice has shown that the mechanism of natural ventilation works well in winter. And in this case, the cistern either does not sweat at all, or it sweats only slightly.

In summer, in hot weather, the hood works very poorly. If you clean the ventilation duct, then the air movement resumes, but only slightly.

To do such procedures is constantly difficult and does not make sense, since the result will always be minimal.

The most effective solution would be to install a supply and exhaust fan in the toilet. You need it to turn on automatically when you press the button on the toilet cistern.

Repair of faulty valves

If the shut-off valve in the toilet cistern is faulty, then water flows and flows through the toilet. In this case, the process of condensation formation occurs constantly.

In order to stop it once and for all, it is necessary to overhaul the drainage mechanism. Practice shows that it is not rational to replace individual parts of this device.

In stores, as a rule, a kit is sold that includes a float valve, the float itself, a "pear" and a pull. From these products, a drainage device is collected and installed in the tank.

When you can't do this with your own hands, you need to invite a plumber.

In this case, many residents prefer to purchase a new toilet bowl already assembled and install it in its place. Experts recommend doing just that, if the financial condition allows.

New models of toilet bowls are presented on the market today. The updated toilet cistern has double walls, and its outer side does not sweat under any circumstances.

A plastic container is installed inside such a tank. An air gap is formed between it and the outer wall, which serves as a heat insulator.

Some craftsmen are able to make such a device with their own hands. But for this you need to have the skills to work with such devices.

General rules

The bathroom is considered the most important room in a multi-storey apartment building. It is here that all residents come several times a day. And it is necessary to keep this room clean and tidy.

First of all, ventilate it. This should be done regularly. It is necessary to monitor the serviceability of all taps and the drain tank.

If condensation occurs, the cause of this phenomenon should be determined and eliminated as soon as possible. No surface should sweat.

If you can't do it yourself, then you need to call a qualified specialist.

The appearance of condensation on the toilet cistern is a rather unpleasant phenomenon. Condensation builds up, dropping onto the entire tank. The droplets roll down, forming a damp spot around the toilet. And such dampness is not at all harmless.

Fungal spores, easily carried through the air, contribute to the development of lung diseases in those who live in such an apartment. Once in the body, spores cause the appearance of lesions respiratory system up to pulmonary edema.

Why does condensate collect on the tank?

As you know from the school physics course, the air around us contains water vapor, the amount of which directly depends on the temperature.

The transition of moisture from water vapor to liquid droplets occurs when the temperature of the heated humid air decreases. We see this when condensation appears on the bathroom mirror, when glasses fog up in winter, when we enter a warm room from the street, and also in many other cases.

How to get rid of condensation?

There are several ways to deal with condensation on tank walls, pipes and other surfaces.

It is not so difficult to establish ventilation if it does not work well. To improve the operation of the hood in the toilet or bathroom, you can install a small axial fan, which provides forced ventilation and removes heated humid air from the room into the ventilation duct and then into the exhaust stack of the building ventilation system.

The fans produced today are characterized by low energy consumption and ease of installation, which allows you to install it in a matter of minutes, even without having experience in performing such work.

When choosing a fan, you should first of all pay attention to its performance. In accordance with modern sanitary norms and rules, air exchange in such premises should be provided in the amount of 25 cubic meters per hour.

Installing a toilet with a double cistern

A very effective way to get rid of condensation on the toilet cistern is to install a double cistern.

Installation of fittings with double drain

To reduce the amount of cold water from the water supply system entering the tank and its cooling walls, you can install a drain fittings with a double drain.

Adjusting the cistern flush fitting

The most common cause of condensation on the toilet is water leakage when water is constantly flowing into the toilet in a thin stream.

This leakage leads to the fact that the water in the tank does not have time to heat up, constantly replenishing with ice water from the plumbing system, strongly cools the toilet tank, on the walls of which condensation falls from contact with warm air.

In this case, it will be necessary to adjust the flush fittings to stop the constant flow of water.

replacement of the sealing gum;
adding a small weight to the valve to improve its fit;
softening the rubber of the valve by spilling boiling water (it helps only for a while, as a temporary measure);
thorough cleaning of deposits on the elastic band and on the valve using a vinegar treatment.

Adjusting the float valve is also not particularly difficult and consists in adjusting its overlap when water is collected to the desired level so that it does not flow over the overflow. An overflow is a hole in any flush fitting that allows you to flush excess water entering the tank into the toilet if the float valve malfunctions.

Another reliable way to stop the constant wetting of the tank from condensation falling out on it can be to replace a conventional compact toilet bowl with a ceramic tank installed on it for installation.

In addition to improving air exchange and adjusting the drain fittings in the bathroom, to reduce the amount of moisture accumulating on the tank, some rules should be followed.

How to get rid of condensation on a toilet cistern

Is the toilet cistern constantly getting wet from condensation? Read about the main reasons for its appearance and how to fix it! Photo and video.

Getting rid of condensation on the toilet cistern

Many owners of city apartments are faced with the problem of moisture on the surface of the cistern. If nothing is done, then moisture flowing down to the floor will soon seep through the flooring and seep into the apartment to the neighbors. Also, moisture dripping will lead to the appearance of limescale on the sanitary ware. How to get rid of condensation on the toilet cistern, homeowners are perplexed - we will consider the answer to this question in our article.

The main causes of occurrence

According to experts, drizzle on the toilet cistern appears in late autumn or winter. The reason for this phenomenon is considered to be a sharp difference between the temperature of the water in the plumbing system and the air inside the premises. If the temperature of the liquid in the supply pipes is in the range from 3 to 5 degrees Celsius, then in the bathroom such indicators increase to 18-22 degrees. In the presence of high humidity in the room, dew drops will appear on the surface of the tank filled with cold water. Moisture condensation will occur with the same intensity on cast iron, ceramic or plastic sanitary ware.

It is quite easy to explain the reason for the appearance of condensation in winter. At this time, the water vapor in the air quickly turns into a liquid form, usually when the air temperature in the room drops. It is completely impossible to get rid of drizzle, but it is quite possible to reduce its effect.

The main reasons for the appearance of water droplets on the drain tank are as follows:

breakage of the shut-off valve, as a result of which the tank will be constantly filled with cold water coming from the water supply. The non-standard operation of the locking mechanism can be easily identified by a thin stream of water that flows down the surface of the toilet bowl. Such accidents lead not only to the appearance of drops of moisture on the plumbing, but also to excessive consumption of water;
condensation can also appear as a result of frequent draining, which leads to a complete emptying of the tank. Modern plumbing fixtures are usually made with thin walls that cool quickly;
improper operation of the ventilation system;
misuse of the premises.

Repair of the locking mechanism

First you need to take care of the correct operation of the drain mechanism. In winter, dew droplets appear on the surface of the tank constantly, but improper operation of the drain system will enhance this effect and can lead to irreparable consequences.

The main cause of failure is the destruction of the material of the drain seal or intake mechanism. In this case, water from the tank will constantly drain into the sewer system, while the tank is constantly being filled with cold liquid from the water supply. As we already said, up to 2 liters of liquid per day can drain onto the floor, but the volume of condensed moisture can be reduced by installing new seals.

Flush tank design diagram

Before installing the drain system, they get rid of limescale on the surface, install new gaskets. To prevent deformation of the seals, the fixing nuts are tightened manually. With a wrench, only the metal clips that go through the bottom of the tank are tightened, but such products are used only on old plumbing fixtures.

Partial elimination of condensation by reducing the volume of the drain tank

The appearance of dew on the plumbing can be prevented by reducing the volume of the drained liquid. It will not be possible to completely avoid the appearance of condensation, especially with frequent use of the toilet. In this case, the tank will be constantly filling, as a result of which the liquid will not have time to heat up to the desired temperature. The difference in temperature fluctuations will lead to the appearance of moisture on the surface of the tank.

To solve the problem, it is recommended not to completely drain the water in the tank, which can be achieved by using the half-release button. The second way out of this situation will be to install a plastic bottle filled with liquid in the tank. Another option for solving the problem is to replace the drain mechanism with a more modern model.

Prevention of temperature fluctuations

Using this method allows you to completely get rid of the formation of condensation on the surface of the plumbing. Dew drops will not appear on the surface of the tank when the temperature of the liquid coming from the water supply corresponds to the temperature indicators inside the room. In this case, moisture condensation will not occur if the drain system breaks down.

In the summer, tap water heats up while passing through the pipeline system, at the entrance to the toilet bowl, the temperature of the liquid is similar to the air temperature in the room, which will prevent condensation from forming. In winter, the supply pipeline is insulated or heated using a special heater equipped with a thermostat. The appliance is set to room temperature. The second solution to the problem is to cool the air in the bathroom or toilet.

Reducing air humidity

Correct operation of the ventilation system will help to reduce air humidity, because excess moisture will be removed into the hood. Some homeowners cover the ventilation holes in the bathroom, which will be the main cause of condensation. The first step is to check the ventilation.

If the ventilation system does not function properly, the ducts must be cleaned. If this does not help, contact the appropriate service. In small bathrooms, where a significant amount of moist air accumulates, a forced air duct is installed. Constant air circulation in the apartment can be provided by the device of several through holes in the doors of the bathroom or toilet.

Toilet ventilation scheme

Using a double walled cistern

The latest toilet bowls are equipped with similar tanks. Such products are much more expensive than conventional plumbing fixtures. Structurally, the new tank consists of an air gap body and a plastic container that is filled with water. This solution makes it possible to negate the difference between the temperature of the incoming liquid and the temperature of the air inside the room.

drain the water from the tank;
you can remove it, it will be easier;
dry;
glue Izolon from the inside over the entire surface of the tank.

How to get rid of condensation on a toilet cistern: the main causes

How to get rid of condensation on your toilet cistern yourself. Prevention of temperature fluctuations and reduction of air humidity. Repair of the locking mechanism.

Why does the toilet cistern sweat and how can condensation be eliminated?

Condensation on the toilet cistern is perplexing for many homeowners. Due to droplets of water constantly flowing from the surface of the cistern, puddles form on the floor, which must be wiped off in time. Otherwise, dampness will lead to mold and unpleasant odors. Of course, you can adapt some container to collect water, and then remember to empty it from the contents in time. Many housewives do this, trying to solve this problem in this simple way. Men try to find out why the toilet cistern is sweating in order to eliminate the cause and forget about the problem forever. Are there effective ways to deal with condensation that periodically appears on the toilet cistern? Let's figure it out.

Reasons for the formation of condensation on the drain tank:

High level of humidity in the bathroom and in general throughout the apartment. High humidity can be caused by a large number of indoor plants, drying a large amount of wet laundry, leaking water pipes or heating systems, and other factors.
The continuous flow of cold water into the toilet tank for a second due to a malfunction of the shut-off valves, as a result of which the water does not have time to warm up to room temperature.

To understand why the toilet cistern is sweating, you need to recall a little school physics course. The contact of warm and moisture-saturated air with cold surfaces inevitably leads to the appearance of water droplets on them. This means that it is necessary to look for ways to dry the air, as well as increase the surface temperature of the drain tank.

Checking the condition of the ventilation holes

Installing a fan that turns on when the light is turned on will help partially solve the problem of condensation.

Repair of faulty valves

Double-walled cistern

The double-walled cisterns of modern toilets never sweat

Some amateur craftsmen try to deal with condensation on the tank by pasting its inner walls with heat-insulating material

Why does the toilet cistern sweat and how to eliminate condensation

Why the toilet tank is sweating - possible reasons. How to get rid of condensation on the toilet cistern? An overview of two ways to solve a pressing everyday problem.

Condensation on the toilet cistern - how to get rid of?

The formation of "dew" on the toilet cistern is a problem that arises in the winter in almost every apartment. The consequences can be different - from small drips and a slight increase in humidity in the bathroom or toilet to the formation of puddles on the floor, the reproduction of mold spores. You can avoid unpleasant consequences by eliminating the condensate on the toilet cistern in advance, how to get rid of which you will learn from this article.

Condensation on the toilet cistern

Why do water drips form?

Ventilation malfunction

The cause of condensation can be malfunctions of the ventilation system or the absence of a ventilation window (often closed up during repairs in order to improve the interior). As a result, proper air circulation is not ensured, and excess moisture settles on surfaces.

Ventilation is a mandatory attribute of a modern apartment

Increased humidity

The location of the bathroom in the bathroom, constant drying of wet linen in the apartment, pipe leakage, a large number of plants in the house cause an overestimated concentration of moisture in the air. If it simply evaporates on pipes, then it settles on plastic and ceramic surfaces, forming drops. On the pages of our portal you can also find out how installing a toilet bowl on a tiled floor and why it matters.

High humidity is the main cause of condensation

Temperature difference

Water for internal filling of the tank is taken from the centralized network. Its temperature is 3 - 5 ° C in winter. Outside room air can reach 25 ° C through the placement of heating pipes. A difference of 10 - 15 ° C is sufficient for condensation to form.

Drainage device breakage

A malfunction of the shut-off valves leads to the constant filling of the tank with cold water, which goes into the sewer without having time to warm up.

If the toilet cistern breaks down, the cold water does not have time to warm up

Excessive water consumption

A similar phenomenon is observed with frequent use of the drain, especially in large families. In addition to the cost, this leads to a stable maintenance of the difference between the temperature outside and inside, therefore, to the appearance of condensation.

Having established the cause of the appearance, consider how to get rid of condensation on the toilet cistern.

Air circulation normalization

First of all, check how effective natural ventilation is. Ventilation windows should be covered with a grill, in no case clogged with dirt and dust.

Natural ventilation is a guarantee of protection against high humidity and mold

Many users prefer to leave the bathroom door open, but a better option is to make a gap at the bottom.

To improve air circulation, you should organize a ventilation grill in the bathroom door

Before installing decorative meshes, the channel should be cleaned of debris, if this has not been done, then there is a possibility that there is no traction in the system. In this case, it must be cleaned. In a private house, this duty falls directly on the owner, in multi-storey residential buildings - on the housing office, where you should contact.

Natural ventilation is not always provided by ventilation. In this case, an artificial one should be installed. It is difficult to do this on your own, since you need to take into account the power of the equipment and the state of the microclimate of the room, so we recommend contacting special centers.

In case of poor quality natural ventilation, it is necessary to organize forced ventilation

There are also systems that dry the air, which are focused on shared bathrooms. They provide a decrease in the degree of humidity by utilizing water vapor.

Temperature balance equalization

There are two ways to achieve approximately the same water temperature in the tank and in the room.

Decrease in air temperature

Usually the problem occurs in winter, so the first method is not always practical. The result can be achieved by lowering the overall temperature in the system, but then the house will become a few degrees cooler. This has its advantages, because you can save on heating.

A decrease in air temperature helps to equalize the temperature balance

With a centralized system, this will not solve the problem. You should take care of the thermal insulation of the pipes near the bathroom, and also make sure that the doors to the room are closed.

Heated supply water

If possible, it is recommended to connect a hot water pipe to the tank. The reservoir will automatically be filled with liquid at room temperature, and the likelihood of condensation will be reduced to zero. The best option is to install an electric heater on the tank.

We install an electric heater to increase the water temperature

Repair of shut-off valves

Condensation that forms on stably working toilets is not so terrible and is much easier to eliminate. In systems, the drainage mechanism of which is damaged, this phenomenon becomes permanent, because the tank is being refilled with cold water all the time.

For the absence of condensation, all fittings must work properly

Gravity can be determined by the noise of flowing water or visually: the stream does not stop after filling the tank, the tank takes a very long time and does not fill completely.

the humidity in the room rises even more;
puddles form on the floor;
dampness leads to mold;
an unpleasant odor arises.

How to get rid of condensation on the toilet cistern?

In this case, neither ventilation nor air drying will be able to get rid of the problem completely. Gravity can be eliminated on your own, but if the breakdown is serious, it is recommended to call a plumber.

If the reason for the constant filling of the tank, therefore, the inability of the water to warm up, is the frequent use of the toilet, for example, in a dormitory, you should control the flow of water when draining.

Frequent use of the bathroom also causes condensation.

Newer systems are equipped with a "partial" drain button, which consumes half the tank. Old toilets do not have this function, but you can replace fittings by installing more economical ones.

Installing the universal tank

Modern systems preclude the appearance of condensation by equipping toilets with double-walled cisterns. A plastic container is placed inside the main body, there is no contact with the ceramic walls, so they remain dry.

In search of a solution to how to get rid of condensation on the toilet cistern, some users independently try to "isolate" the tank, pasting the walls with protective materials inside or outside. The first is not always effective, besides, it reduces the volume of the tank, the second spoils the aesthetic appearance, and sometimes even harms the surface coating.

Following the suggested tips will help you get rid of the "wateriness" on the cistern, as well as improve the microclimate of the bathroom.

Condensation on the toilet cistern how to get rid of the cause?

A sore problem for many in the cold season is condensation on the toilet cistern, how to get rid of which you can learn from this article.

A modern bathroom boasts practicality, convenience and comfort. Properly maintained, the toilet appearance and functionality is retained for a longer period. But when fogging occurs on the toilet cistern, it can lead to damage to plumbing equipment, the appearance of foreign odors and the formation of black mold. How to cope with leaks and eliminate the cause completely?

When, it is necessary to identify the original cause of the appearance. Usually, this is a high level of humidity in the room. To normalize this indicator, it is necessary to determine the reasons for the increase in the level.

Malfunctioning pipes or plumbing equipment. Such breakdowns must be eliminated as soon as possible, since ignoring them can only aggravate the situation. Under the influence of moisture, pipes are exposed to corrosion, which leads to unnecessary leaks and flooding of neighbors.
Drying large quantities of laundry. This is true for large families and small spaces. In this case, it is recommended to dry things on the balcony (if available), as well as in the yard or in a separate room.
Poor ventilation system. Because of. That ventilation does not perform its functions properly, the air in the room does not have time to renew itself in time. From what, the room does not dry out well enough.
The most common reason for the appearance of a toilet bowl sweating is a breakdown inside the cistern itself. As a result, cold water flows in a constant mode, not having time to warm up to room temperature in time. This is why the tank starts to sweat.
A large amount of vegetation in the house requiring moisturizing procedures. Also, the presence of an aquarium affects the increase in the level of humidity in the room. You can eliminate this cause by installing an air dryer.

A striking example of fogging toilet cistern

Condensate removal methods

The appearance of dampness, mold and an unpleasant odor is far from full list the effects of fogging on the toilet cistern. To resolve these shortcomings, it is necessary to take a number of measures to improve the functionality of the premises.

Reduced water consumption

Since the latrine is used quite often in large families, the amount of flushed fluid should be reduced by adjusting the amount of water supplied. A simpler solution to this problem is to purchase a new toilet with a flush, which can be automatically adjusted. Also, toilet cisterns with an improved water drainage system are on sale. When you press the button for the first time, the water is drained, and when you press the button again, the process stops.

Improving the ventilation system

Poor ventilation is the cause of many problems: respiratory diseases, insufficient oxygen, unpleasant odor, humidity in the room.

In order to check the functionality of the air ducts, it is enough to bring a sheet of paper to the ventilation hole. In this way, you can check the quality of the system. If it malfunctions, the walls and floor can become covered with water droplets and fogging, which in turn can lead to the formation of fungus.

Forced ventilation

Installing forced ventilation helps to solve the problem of condensation on the toilet cistern. Many consumers, wanting to decorate the room, close the ventilation hole. This should not be done under any circumstances! For such purposes, you can turn your attention to decorative grilles that cover the not aesthetic appearance of the hole. At the same time, maintaining normal air circulation in the toilet room. Another solution is to install a fan, which starts when the light is turned on in the room. And of course, the easiest option would be to leave the door to the restroom a little ajar when there are no visitors in it.

Change in water temperature

Misting on the cistern is caused by the difference in water and room temperature. Usually, it ranges from ten to fifteen degrees Celsius. By minimizing this difference, you can partially get rid of condensation.

To do this, you need to: insulate the pipeline, change the water source from cold to hot, or install a water dilution system.

Insulation of the drain tank

An example of insulation of a toilet cistern with foamed polyethylene

Insulate drain tank it is possible by placing a plastic structure in it at a distance of no more than two or three millimeters from each other. Between which, you need to install gaskets. This creates a tank-in-tank system. When working, it should be borne in mind that the thickness of the material used should not exceed one centimeter, since otherwise the required amount of water will not fit in the tank. When installing the insulation, you can use the available means: sealant, glue and polyurethane foam. It is worth remembering that these works are carried out only after the water is completely shut off, and the tank is free of all moisture.

Repair of the cistern structure

In the event of a breakdown in the structure of the drain tank, it is necessary to pay attention to the elasticity of the pear, the quality of the rubberized elements, the functionality of the shut-off valve. It is best to replace a worn-out part, and not try to modernize it yourself. Otherwise, such self-activity can lead to an uncontrolled discharge of water into the sewer, as a result of which the formation of condensation can increase to two to three liters per day.

Before installation new system, you should pay attention to several details: if the nuts are made of plastic, then they must be tightened by hand; do not connect some parts too tightly, this can lead to premature wear of the structure; drain mechanisms should be located in the tank in such a way as to exclude accidental contact with its walls.

Draining control

To reduce the volume of drained water, it is enough to purchase a newer tank model. If this option is not possible, then the drain unit can be adjusted manually by independently adjusting the valve mechanism.

In addition, installing a double flush button can help solve the problem. In which, pressing one of them will mean draining the water, and the second will stop the current process.

Home microclimate

To normalize the operation of the drain system, you will need to start by modernizing the home microclimate. Since fogging on the toilet cistern may be the result of poor ventilation in the apartment. More specifically, the exhaust air does not leave the room, but lingers, warms up and accumulates, settling on the surfaces of walls and plumbing. If replacing the old duct is not possible, then the ventilation of the room should be monitored. Moreover, the restroom is a refuge for various kinds of bacteria. It is not necessary for them to improve the conditions for a harmonious arrangement of their existence and reproduction.

Toilet cistern perspiration is a common problem for many apartment owners. Sometimes, in search of its solution, the owners correct a number of other various consequences. Thus, ennobling your home. If the condensate on the tank dries out quickly, and its formation is not frequent, then in such a situation there is no reason to panic. Since, the use of drastic measures is not required.

Toilet cistern sweats what to do. Why does the toilet cistern sweat and how can condensation be eliminated? If your toilet cistern is sweating, you need to urgently check the health of the ventilation system in the bathroom.

Causes of occurrence

Troubleshooting

Ventilation

How to raise the water temperature?

Checking the condition of the ventilation holes

Repair of faulty shut-off valves

Double-walled cistern

Causes of condensation

What is the best way to eliminate fogging?

Ventilation cleaning

Repair of faulty valves

General rules

Getting rid of condensation on the toilet cistern

The main causes of occurrence

Repair of the locking mechanism

Partial elimination of condensation by reducing the volume of the drain tank

Prevention of temperature fluctuations

Reducing air humidity

Using a double walled cistern

Why does the toilet cistern sweat and how can condensation be eliminated?

Checking the condition of the ventilation holes

Repair of faulty valves

Double-walled cistern

Condensation on the toilet cistern - how to get rid of?

Why do water drips form?

Air circulation normalization

Temperature balance equalization

Repair of shut-off valves

How to get rid of condensation on the toilet cistern?

Installing the universal tank

Condensate removal methods

Reduced water consumption

Improving the ventilation system

Forced ventilation

Change in water temperature

Insulation of the drain tank

Repair of the cistern structure

Draining control

Home microclimate

Useful related videos