Borehole pumps jileks water cannon house. Borehole pumps dzhileks water cannon house Automatic water supply system water cannon house

Description:Automated water supply system Dzhileks Vodomet 60/72 HOUSE... The centrifugal submersible pump "Vodomet" is a multistage electric pump with "floating" impellers, "washed" by an electric motor and a built-in capacitor. The submersible pump Vodomet is designed to supply water from wells with an inner diameter of 100 mm or more, as well as wells, reservoirs and open reservoirs for the water supply system of the house, irrigation of the garden and vegetable garden.

Peculiarities:

Submersible pumps "VODOMET" in comparison with vibratory pumps:

have greater efficiency, since the rotary motion is more economical than the reciprocating one due to the absence of the "start-stop" mode;
submersible pumps are less noisy;
submersible pumps are much more durable, since they do not have a quickly wearing valve-piston system;
Submersible pumps do not have a harmful effect on the well and the entire water supply system, since they do not have significant vibration. Silence is one of the most important features of the Vodomet pump: the house will not be filled with extraneous noise during its operation.

Borehole pumps"VODOMET" in comparison with vortex:

borehole pumps are more efficient;
are not subject to changes in parameters over time, while in vortex pumps, wear of the working surfaces reduces the flow-pressure characteristic;
borehole pumps are less noisy;
borehole pumps are not as sensitive to contamination.

The "VODOMET" pump with "floating" impellers in comparison with traditional ones:

has a higher hydraulic efficiency due to self-setting of "zero" clearances, which increases the pressure characteristic of each impeller. This reduces the required amount, i.e. axial dimensions of the pump, mass of rotating parts, and, consequently, vibrations are reduced;
has a lower tendency to clogging, as it is able to pass large particles. The Vodomet system is ideal for domestic use: the house will always have a working water supply system.

Pumps "VODOMET" with a "washable" electric motor have a number of advantages over devices of a traditional layout:

the location of the electric motor above the pumping part allows the power cable to be removed from the upper cover of the pump, which reduces its dimensions and allows the pump to be mounted in a well with a casing of a smaller diameter (it is cheaper);
the electric motor of the borehole pump is reliably protected from overheating by the flow of water that washes it, which passes through the annular gap between the stator shell and the pump casing;
the location of the seal at the highest point of the hydraulic part of the pump protects it from the ingress of sand, and, therefore, significantly increases the service life;
the design of the pump allows it to be used in a partially submerged position, for example, in open shallow bodies of water.
VODOMET submersible pumps with a built-in condenser eliminate the condenser box and allow the use of a conventional three-core cable instead of a four-core cable, which simplifies installation.
the use of a mesh (1.5x1.5 mm) filter instead of a slotted filter more effectively prevents the penetration of long particles into the pump, which can clog the pump. All parts of the pump that come into contact with the pumped water are made of materials approved for contact with food.

The main components of the VODOMET DOM automated water supply system: a submersible pump of the VODOMET series, a control panel with a pressure sensor, a 50 l hydraulic accumulator. made of carbon steel, filter housing 10 ", check valve, ball valve, pressure gauge, unions.

Manufacturer

Manufacturer: GILEX is a well-known manufacturer of pumps and pumping equipment. JILEKS was founded on January 5, 1993 in the city of Klimovsk, Moscow region. It was a young, intensively developing company. Today, JILEX LLC is already widely known as a leading manufacturer of pumps of the highest quality. Also, we can say with confidence that the products manufactured by the pump manufacturer "DZHILEKS" are designed specifically for the Russian market. It should be noted that branded pumps from the manufacturer "DZHILEKS" are characterized by wear resistance, ease of maintenance, the ability to work normally in the most difficult conditions and, at the same time, have a more attractive price in comparison with their foreign counterparts. In addition to constantly improving the design and expanding the range, such important points for consumers and professionals as design, dimensions, ease of installation and availability of repair are taken into account.

Every day the specialists of the pumping plant "DZHILEKS" improve the designs of pumps, thereby expanding and making the most efficient model range. The main goal of the company is to strive to make the pumps sold by the manufacturer "GILEKS" available to as many consumers as possible.

Specifications

Specifications:

Maximum flow rate, l / min
Maximum head, m
Power consumption, W
Cable length, m
Max. the size of the passed particles, mm
Maximum immersion depth, m

It is an automated water supply system with a submersible multistage centrifugal pump, "floating" impellers, "washed" by an electric motor, a built-in condenser and a set of necessary equipment. All components are made of durable and wear-resistant materials in accordance with hygienic certificates and are adapted for use in Russian conditions.

Description
The Vodomet Prof 55/75 DOM system is an automated water supply system with a submersible multistage centrifugal pump, "floating" impellers, "washed" by an electric motor, a built-in condenser and a set of necessary equipment. All components are made of durable and wear-resistant materials in accordance with hygienic certificates and are adapted for use in Russian conditions.

Equipment
The delivery set of an automated water supply system includes various components that perform certain functions in the system:

submersible pump Vodomet Prof 55/75 - water supply from wells, wells, reservoirs and open reservoirs
control panel with pressure sensor - the ability to program the operating mode of the pump
hydroaccumulator (50 l) - accumulation of water under pressure, “smoothing” of water hammer
filter housing - placement of a standard 10 "cartridge
three-outlet fitting (1 ") - connecting the accumulator to the water supply line
ball valve (1 ") - shutting off, if necessary, the water supply line
pressure gauge - pressure detection
check valve(1 ") - preventing the outflow of water from the water supply system back into the well
fitting (1 "-1") - connection of the check valve to the delivery line

Design
The borehole electric pump consists of a pumping part and a "washed" electric motor, which are located in a single housing made of stainless steel. The induction motor is sealed and protected from overheating by a thermal protector built into the stator winding.
"Floating" impellers are characterized by running-in and can be moved in the axial direction.
To secure the cable, there are two lugs located in the rear cover of the pump with an outlet pipe. A waterproof cable also comes out of the back cover to simplify pump connection.

Distinctive features

complete set for water supply
high hydraulic efficiency
no vibration
low noise level
motor protection
dry run protection
simplified installation
long service life
modern design

Advantages
The downhole pump of this model is modified for use in "sandy" wells, therefore it is capable of pumping water with a high content (up to 300 g / m3) of sand in a suspended state.

Compared to vibration and vortex pumps, "Vodomet" is more efficient due to economical rotary motion and less noisy. Due to the absence of significant vibration, the pump does not adversely affect both an individual well and the entire water supply system as a whole.

"Floating" impellers have higher pressure characteristics and less tendency to clogging. Self-setting of "zero" clearances results in higher hydraulic efficiency.

The flow of water passing between the stator shell and the pump casing reliably protects the "washed" electric motor from overheating.

Mounting
The downhole pump is completely ready for operation, you just need to plug the plug into the socket. However, all electrical work (installing the socket, connecting to the mains, grounding, etc.) must be carried out by a specialist in accordance with the safety regulations.

Installation of the tool in the well involves placing the pump in a casing pipe with a minimum inner diameter of 100 mm. In order to protect the well from the ingress of groundwater, etc., it is better to close the top of the pipe with a head.

To submerge the pump in the borehole, use a steel cable pulled through the two lugs in the top cover of the pump. The presence of a built-in capacitor allows the use of a conventional three-core cable (instead of a four-core cable), which greatly simplifies installation.

Do not install the pump at the bottom of the well to avoid pump shutdown. The distance to the bottom of the well must be at least 1 meter.

Application
System Vodomet Prof 55/75 HOUSE It is used to supply water from wells with a diameter of 100 mm and above, wells, reservoirs and open reservoirs. Ideal for automated home water supply, orchard irrigation.

Note
It is strictly forbidden to pump flammable and chemically active liquids, as well as water containing abrasive and solid substances.

Recommendations
Protect the pump from direct sunlight and do not place it near heating devices.
Before a long period of inactivity, the pump must be rinsed in clean water, the remaining water must be drained, and then the device must be dried.
The ambient temperature in the room where the pump is installed should not drop to minus values.

Quality assurance
The system of the Vodomet DOM series has high performance, unpretentiousness to the purity of the pumped water and resistance to voltage fluctuations in the power grid, which confirms its high-quality and reliable operation throughout its long service life.

Operational limitations

maximum permissible sand content - 300 g / m 3
the maximum number of pump starts - 20 times per hour
the maximum immersion depth of the pump under the water mirror is up to 30 meters, but not less than 1 meter from the bottom of the source
the maximum size of the passed particles - 1.5 mm
permissible temperature range of pumped water - from + 1 ° C to + 35 ° C

Flow-pressure characteristics of the pump

The creation of a water supply system for a country house or a personal plot is often associated with a well installation. And it, in turn, requires a pumping unit capable of supplying water from a considerable depth to the surface. One of the best series of such equipment is the Jileks House system.

Equipment features

Using pumps such as the Water Cannon House Dzhileks in your household, you get the following advantages:

ensuring a constant pressure level in the network, regardless of the water flow;
the presence of a soft start, which allows you to reduce starting currents and reduce the load on the unit. Thanks to this, the possibility of an accident in the system is minimized, and the operating life of the pump is long enough (more than 10 years of continuous use);
increased reliability, provided by automatic reduction of the pump motor speed with less water consumption, as well as the use of only the highest quality materials in the production of the device;
high work efficiency. The efficiency of the equipment keeps operating costs to a minimum;
affordable price for any pump of the Jileks house series;
a certain selection of various units, due to which you can easily select the unit for your conditions.

Features of the choice of pumps

By choosing specific models series Dom System Jileks, it is worth being guided by the following criteria:

the depth of the well from which the water is supplied. For most of these water supply systems, the Dzhileks Vodomet 60 72 House unit is sufficient;
the likelihood of increasing the depth of the aquifer in the future. After all, this can also happen, and by overpaying a very small amount for a pump of the Jileks 60 92 model, you will receive a guarantee that you will not have to change equipment in the next few years.

In general, the purchase of pumps such as Vodomet House Dzhileks is not the only way to supply water from wells. For some of these water supply systems, it will be more profitable to buy Dzhileks 60 35, not as productive, but also cheaper. And, if the required pressure is even less, and the flow rate of the pumped water is large enough, Jileks 200 10f will come in handy, with which you can not only pump clean water but also to remove drains.

Purchase of equipment Dzhileks

Anyone can find all this and much other equipment in the TeplovodService catalog. As the official supplier of the Jilex company, we provide the highest quality service for this equipment, as well as very affordable prices.

System Vodomet DOM 55/75- except for a submersible centrifugal pump, it includes all units for an automatic water supply device. It is mainly used for uninterrupted water supply at home or summer cottage. The source of water can be a well or a well with a sufficient flow rate.

All components and subassemblies of the system are carefully selected based on numerous tests and technological calculations, as well as design features each node. This resulted in excellent stability and performance indicators.
The programmable control panel allows flexible control of the water supply system and also carries a number of protective functions.
The use of this system, which includes a Vodomet pump, allows you to achieve increased productivity and long-term pump service, as well as significant energy savings due to smooth switching on and off of the electric motor and optimizing the pump operation time.

Peculiarities:
- the presence of a programmable control panel with a pressure sensor
- the set includes a pre-filter for water
- has high reliability and durability: the accumulator and the submersible centrifugal pump are made of materials that are resistant to wear and chemically inert, which allows the use of this pump for drinking water supply.

Specifications

Maximum flow rate, l / min - 55
Maximum head, m - 75
Power consumption, W - 880
Voltage, V / Hz - 220/50
Consumption current, A - 4
The number of stages in the pump is 9.
Maximum immersion depth, m -30
Diameter of solid impurities, no more, mm - 1.5
Pump cable length, m - 30

The Vodomet DOM system includes:

15. Submersible centrifugal pump Vodomet 55/75
16. Plastic filter housing
17. Hydraulic accumulator.
18. Programmable control panel with operation indication and pressure sensor.
19. Check valve
20. Ball valve
21. Triple nipple 1 inch and connecting nipples.
22. Manometer.

Remote Control

The basis of this remote control is a microprocessor controller. Includes keyboard and intuitive display with sensors.
What information does the display show:
- pressure in the water supply system
- consumed current, A
- mains voltage
- load factor of the electric motor.
Controller functions:
- maintaining the programmed pressure range in the system with an accuracy of 0.1 atm.
- smooth start and stop of the pump - this reduces starting currents, prevents water hammer, reduces the mechanical load on all pump elements.
- protection against voltage surges (in the range of 160-250V) and overcurrent during operation
- protection against dry running by controlling a sharp drop in pressure and reducing the value of the consumed current.
Important! All these factors together lead to safer and longer pump operation.

The package includes

Pump complete with cable - 1pc.
Control panel with pressure sensor - 1 pc.
Hydraulic accumulator - 1pc.
Fitting - 1pc.
Check valve - 1pc.
Operating instructions - 1pc.
Warranty card - 1pc.
Container - 1pc.

Design and operational features Vodomet DOM

Successful design and high quality The Vodomet pump, which is the pumping part of the water supply system, allows for efficient water supply with maximum efficiency.
- the presence of a programmable control panel (with a pressure sensor) with which the system is controlled.
- availability of a hydraulic accumulator
- the presence of a preliminary water filter
- the non-return valve, which is part of the system, prevents water from flowing out of the pipes back into the well or well.

Due to the presence of a programmable control panel and carefully selected components that make up a single whole, this system can be used both for water supply of a house or summer cottage, and for small businesses - small industrial production, farms, greenhouses with drip irrigation, etc.

Before installing the system, for further uninterrupted operation, you should calculate the water consumption and take into account the following factors:
- static and dynamic well level
- well flow rate
- the possible maximum volume of water consumption per day and per unit of time.
- the depth of the well or well, as well as the height difference in the area.

Thanks to the electronic components of the control panel, the system will operate automatically, however, we recommend that you periodically monitor the data displayed on the electronic display and indicator lights for possible optimization of work. submersible pump and the entire system as a whole.

Contact our specialists for advice if you need more detailed information for the selection of pumping equipment.

How to buy the Vodomet DOM System

You can buy the Vodomet DOM pumping system by making an order directly on the website of the online store, or by calling by phone in the Contacts section. Our manager will contact you and arrange delivery or reserve the goods for pickup.

If you need the Vodomet DOM System in Moscow, delivery within the city and in the nearest Moscow region is at your service. For buyers from other regions of Russia - delivery by any transport company or postal service as agreed.

Payment for goods is carried out in the following ways:

1. Payment in cash.

When picking up from the store, or when receiving the goods to the courier.

2.Bank transfer - payment according to the invoice for payment as for legal and for physical persons.

When placing an order, select a payment method: "Bank Transfer".

After confirming the order, our specialist will contact you and after agreeing on all organizational issues you will be sent an invoice for e-mail which you can pay at any bank or via an internet client.

1. Pickup.

Pickup time and terms:

PVZ metro Sokol: you can pick up the order the next day after the order from 10 to 18 on weekdays. The order is stored at the pick-up point for 3 business days.

Pickup cost:free of charge when ordering from 1,000 rubles. (when ordering less than 1,000 rubles - the cost of pickup is 80 rubles.)

Attention! At the point of issue of orders there are only pre-reserved goods!

The employee of the pick-up point does not give any advice on the goods!

Driving directions to the pickup point is located on the page

2. Delivery in Moscow within the Moscow Ring Road

The following items are delivered free of charge:

Kerosene heaters of the "Sengoku" trademark

Cost of delivery:

If your order weighs more than 20 kg - the manager will calculate and inform you the cost of delivery additionally!

Time of delivery:

Delivery is carried out on weekdays from 10:00 to 20:00.

Per 30-90 minutes, the courier will call you and agree on the exact time of arrival.

The exact delivery address (city, street, house number, apartment or office number, intercom code)

The contact person

Contact phone numbers

3. Delivery outside the Moscow Ring Road and further across the Moscow region

Cost of delivery:

If the WEIGHT is not indicated in the product card, you can check it with the manager.

If your order weighs more than 20 kg - the manager will calculate and inform you the cost of delivery additionally!

Time of delivery:

Delivery is carried out within 1-3 working days from 10:00 to 20:00 without reference to half a day.

Per 1-2 hours before delivery, the courier will call you and agree on the exact time of arrival.

What is important to indicate when ordering:

Exact delivery address ( city, district, settlement, street, house number, apartment or office number, intercom code)

The contact person

Contact phone numbers

4. Delivery to the regions of the Russian Federation

We can send you goods from any of the following companies.

CDEK - www.cdek.ru

First Forwarding Company (PEC) - www.pecom.ru

The estimated cost of delivery of goods can be found on the websites of these companies or contact our specialist.

What is important to indicate when ordering:

Passport series and number, date of issue

Full Name

City of receipt

If none of the above methods suits you, we will send the goods to your address in another way - as agreed with you.