Teplocom st 555 mains voltage stabilizer schematic. Boiler voltage stabilizer. High quality voltage stabilizers series "Teplocom"

Voltage stabilizers are designed to compensate for voltage surges that can occur in the network and damage sensitive electrical equipment. When developing stabilizers, Teplocom takes into account both the peculiarities of Russian power grids and the requirements of high-quality equipment.

Features of ST-555 stabilizers
- Voltage stabilizer for power supply of heating systems based on wall and floor boilers.
- Power 555 VA.
- Safe plastic case.
- Microprocessor control.
- Voltage range: 145-260 V.
- Miniature, compact size.
- Protective automatic shutdown in case of network failure.
- Protection against voltage surges.
- Lightning protection.
- Large overload capacity.
- Stabilization of the relay type.
- Does not distort the shape of a sinusoid.
- Three-point wall mount.

Stabilization

Physical characteristics and functionality

Dimensions and weight

Delivery of goods is carried out throughout Russia. When delivering in Moscow and the Moscow region, we deliver the order within the time frame agreed with the buyer within three days from the date of its confirmation. The day and time of receipt of the goods are discussed with the manager when placing an order.

Voltage stabilizer Bastion TEPLOCOM ST-555 is used to stabilize the voltage in the circuit during sudden voltage surges. High swings can happen for a variety of reasons. One of them is abruptly turning off and then turning on the device. Including, due to unexpected changes in the network and in connection with overload or lightning strikes into the general supply network during operation. This leads to the fact that electrical equipment may simply not be able to withstand such sudden changes and will fail. To prevent this from happening, it is recommended to install Bastion voltage stabilizers.

Principle of operation

The model is an apparatus with a transformer inside. It connects to a variable circuit. At the other end of the "wire" are diodes. Next comes the capacitor bridge. After - transistors and a regulator. The principle of operation is based on the operation of a transformer. As soon as the current flows to the transformer, then the diodes that are connected to the transistors start to work. This occurs if the allowable voltage range exceeds the specified normal values. The capacitor in this case begins to work as a kind of converter. In order to prevent overheating in the collector circuit, the stabilizer is equipped with automatic equipment. After the current passes through the resistor, it returns to the transistor. So it turns out that the principle of the device is based on feedback. An alternating current is created inside it, during which the electrons can change their own direction. This leads to a change in rated load. At the exit, the flow of electrons goes through the filter, after which a direct current of the required and constant power is formed.

Appearance

The appearance of the stabilizer is simple and elegant. The body color is completely white. There is nothing superfluous on the front cover. Just above the center is only the name of the manufacturer. On the top of the front cover, you can also find two pieces of slots. They were made to provide constant cooling during operation of the device. This allows the internal elements on the boards to stay cool and operate throughout their entire service life.

The maximum power consumption of the device is 3000 W with protection class IP20. The model is capable of operating at a relative humidity of 100%. The voltage stabilizer was manufactured in the Russian Federation.

The voltage stabilizer Teplokom ST - 555 with a power of 555 VA is designed for effective adjustment of the power supply of wall and floor boilers intended for the heating system. The wall mount for the stabilizer is mounted using a three-point mount. The performance indicators, reliability and ease of installation of TEPLOCOM ST-555 are very high.

The principle of operation of the device is based on the fact that when an increase or decrease in the voltage of the electrical network is detected, an emergency disconnection of the load is made. The power supply circuit is opened by the activation of the microprocessor-based protection relay. The relay type of devices is very common in Russia. The originality of the network connection solution makes it possible to install the device at the facility without special costs.

Functions of the Teplocom ST-555 stabilizer:

• Simple and convenient connection
• Safe plastic housing
• Miniature dimensions
• Overvoltage protection
• Fast protection in case of network failure
• Lightning protection
• High overload capacity

The stabilizers are made from high quality materials. The reliability and durability of the device is ensured not only by the quality of the product itself, but also by compliance with the operating conditions:

• The frequency of the current in the network must be 50 ± 1Hz
• Air temperature - from +5 to + 40 ° С
• Humidity - up to 95% at t + 25 ° С.

Teplocom ST-555 specifications:

• Declared total power, no more than 430 W
• Dimensions, no more than 128 * 170 * 85 mm
• Weight no more than 1.8 kg

The main thing is to correctly determine the size of the load connected to the device. Namely, to know what is the maximum power of the electric boiler connected to the heating system. Taking into account the recommended margin of 20%, the rated power of the stabilizer will be 400 VA. In this case, the maximum consumed load can be equal to 555 VA. This peak consumption is possible only for no more than 1/4 hour.

Thus, the heating system to which the boiler is connected always receives a safe, permissible voltage, and is able to work reliably, regardless of the instability of the input signal.

Conclusion

Modern electric boilers can instantly react to voltage drops in the network. The Teplocom ST-555 is designed to provide the highest level of protection for yours and give you peace of mind.

Product code: 555

Features:

Features of TEPLOCOM ST-555

• power 555 VA;
• lightning protection;

Characteristics

Product code: 555

Voltage stabilizer for gas boiler. Load power - 555 VA, network range - 145-260 V, full power in the entire network range, voltage boost voltage stabilization, microprocessor control, safety shutdown in case of network failures with automatic recovery, indication of emergency situations. Checking the phasing and potential on the ground bus. Indication of incorrect phasing and the presence of voltage on the ground. Error indication only when the stabilizer is turned on for a minute, if the error is not eliminated, the indication goes into sleep mode - until the next turn on. Complete self-diagnostics of all units and operating modes of the stabilizer. Indication of correctable faults - output protection actuation. Small-sized wall-mounted plastic case. Fast and easy connection (no more complicated than an extension cord). Analogue "China XXX-1000". Insured by Ingosstrakh RUB 3,000,000. Recommended by the world's leading manufacturers for wall-hung boilers. Leader in the heating equipment market.

Guarantee:

Purpose of the TEPLOCOM ST-555 stabilizer

Mains voltage stabilizer TEPLOCOM ST-555 designed to stabilize the mains voltage in order to improve the quality of power supply The stabilizer is designed for heating systems and can be installed on objects for various purposes: cottages, apartments, offices, industrial enterprises, institutions, etc.

Mains voltage stabilizer for power supply of heating systems based on wall and floor boilers. The original solution for network connection allows you to install stabilizers on site without unnecessary costs.

Anyone can handle connecting the stabilizer!

TEPLOCOM ST-555 has a simple and reliable three-point wall mount

Features of TEPLOCOM ST-555

• power 555 VA;
• simple and quick connection (no more complicated than an extension cord);
• safe plastic case. Miniature dimensions;
• surge protection;
• protective automatic shutdown in case of network failure;
• lightning protection;
• designed in accordance with European electricity supply standards;
• high overload capacity;
• checking the phasing and potential on the "Ground" bus;
• indication of incorrect phasing and the presence of voltage on the "ground";
• error indication only when the stabilizer is turned on for a minute, if the error is not eliminated, the indication goes into sleep mode - until the next turn on;
• full self-diagnosis of all units and operating modes of the stabilizer;
• indication of correctable faults - output protection actuation.

Specifications TEPLOCOM ST-555

We recommend reading

Windows instructions

Cough after and during meals: reasons for what to do

Windows instructions

Useful properties and contraindications for the use of barberry

Android instructions

A wen appeared on the eyelid: causes, negative consequences and methods of treatment

Windows instructions

Total protein: what is it and its norm in a blood test

Android instructions

Uterine cancer: first signs and symptoms, early treatment

Windows instructions

Causes of coughing while eating