The phone is frozen when turning on the android. Lenovo tablet hangs: what to do.
I quote Nikolai:
Hello. To get started, read this -. If your tablet is so dear to you, then it is better to immediately take it to service center... If you want to try to repair it yourself, then you just need to reflash it again using the ODIN program. I recommend that you first read this material -. Just download the official service firmware (the version that you had at the time of the update). To do this, you will need to install the driver for your tablet (USB_Samsung_Driver), the ODIN program on the PC, download the firmware (multi-file or single-file). Run the program, put the tablet in flashing mode (Power button + Volume- (maybe "+"). In some cases, you still need to hold down the Home button.) When the tablet enters flashing mode, connect it to a PC with drivers already installed and the program is running ODIN should detect the device Then in the ONE program select the firmware (or the firmware files, if the multi-file firmware) and flash it.
During the operation of smartphones on the Android platform, errors, glitches and freezes often occur. The article will tell you what to do if Lenovo tablet is frozen.
The tablet is frozen and does not turn off
If the device hangs in some program and does not respond to the held down power button, then you can solve the problem in several ways:
- If the tablet is equipped with a removable battery, then you need to remove it, then reinsert it and try to turn on the gadget.
- Some models have special button reboot. Usually you need to press it with a thin object (for example, a pen).
- Hold down the power key and the volume up button.
- Wait until the tablet is completely discharged (this can take several hours).
The tablet stuck on the splash screen when turned on
If the device turns on, but hangs on the Lenovo manufacturer's splash screen or the Android logo, then there are only a few ways out: restarting the device, if this does not help, then you need to reset the settings or flashing. It is worth noting that you must first save all data on a memory card or other removable media. If, after resetting the settings, the tablet still freezes when turned on, then you should take it to a service center.
Other problems
If the Lenovo gadget freezes, but at the same time reacts to user actions, then most likely the matter is in software failures or viruses. You need to scan the file system using antivirus, you can also uninstall the application that causes errors.
Now you know what to do if the Lenovo tablet does not turn off or hangs on the logo / splash screen during the startup process.
Tablet won't turn on? Do not rush to despair! Everything can be much easier than you think. Below you will see the headings that indicate the problem, find the one that suits your problem and read.
Tablet does not turn on
Why won't the tablet turn on? Many people simply forget that the tablet can be discharged. Tablet won't turn on? Recharge! We put it on charge and after 10-15 minutes you can try to press the power button, if an image appears, the download will start - everything is fine, let it continue to charge.
The tablet did not fall? Perhaps the display is damaged, in this case, check, perhaps the device is under warranty and take it urgently to the SC (service center).
The tablet is frozen and does not turn on
If the tablet freezes, and then stopped turning on, then it is worth deciding after which this freeze happened:- 1.Played the game and froze
- 2.Got rooted and hung
- 3. I just “climbed” the tablet, and it froze
- 4 watched a movie or listened to music
1. If you played and the tablet froze, then you should look for the problem in:
A) the game
So, let's analyze option "a". Try to do full reset (Hard reset) using standard combinations. If it helped - great, but don't install this game again - most likely, the developers of the application are completely armless.
B) hardware component (in hardware)
If the first option did not help, then you should contact the SC, tk. you will have to replace the failed part. The processor could burn out due to high load (for example, the critical temperature threshold was crossed).
2. If you received root-rights and the tablet froze, and then refuses to turn on - do a Hard Reset, and if it does not help, reflash.
3. In the case when you just used the tablet, as usual, and it freezes, you must first do a full reset (Hard Reset), pull out the microSD card, if it is in use. Did not help? Reflash your tablet PC!
If this does not help, then it is necessary to take the device to a service center, most likely, the problem is hardware.
4. Listening to music or watching a movie and the tablet freezes, what should I do? The recommendation is standard - try restarting, but if it does not turn on - do a Hard Reset.
If this does not help, then, for sure, some component from the hardware is out of order. It is worth paying attention to the degree of heating of the device case.
The tablet turns on halfway
If the tablet turns on halfway, then we state a software failure.Symptoms:
Causes:
- 1. Incorrect installation or operation of applications (games, programs, etc.), for example, to obtain root rights.
- 2. unexpected termination of system processes, for example, through superprograms to save battery power or simply task-killer (applications for closing so-called "unnecessary" processes).
What to do?
- 1. Make a Hard Reset
- 2. Didn't help?
How to solve the problem?
- 1. Press the "Home" button (if there is one)
- 2.Click on the volume up and down rockers
- 3.Hold down the volume rocker and the Power button
Try these options, if it does not help, reflash the device.
How to reflash and where to find the firmware - ask, either in the comments or on the RulSmart forum.
I quote Nikolai:
Hello. To get started, read this -. If your tablet is so dear to you, then it is better to immediately take it to a service center. If you want to try to repair it yourself, then you just need to reflash it using the ODIN program. I recommend that you first read this material -. Just download the official service firmware (the version that you had at the time of the update). To do this, you will need to install the driver for your tablet (USB_Samsung_Driver), the ODIN program on the PC, download the firmware (multi-file or single-file). Run the program, put the tablet in flashing mode (Power button + Volume- (maybe "+"). In some cases, you still need to hold down the Home button.) When the tablet enters flashing mode, connect it to a PC with drivers already installed and the program is running, ODIN should detect the device, then in the ONE program select the firmware (or firmware files, if multi-file firmware) and flash it.